We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPSC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-L[5-30/1]
Description
Slot Pins for Inspection Jigs/Oval Straight Type
Stock availability:
On request
If you are looking for MISUMI KJPSC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-L[5-30/1], reach FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are outlined in the quality of merchandises and personalseparate attention to each client. We value everyone, who liased with us - hence, our regular customers procure the most acceptable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly compose new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Argentina, Dominican Republic, Cuba, Mali, The Gambia, El Salvador, Iceland, Djibouti, Antigua and Barbuda, Bangladesh, Switzerland, Philippines, Ireland, Malaysia, Togo, Uruguay, Syria, Estonia, Costa Rica, Kazakhstan, Eritrea, Vietnam, Peru, United Arab Emirates, Sudan, Guatemala, Benin, Moldova, Belarus, Brunei, Australia, Kuwait, Zambia, South Sudan, Greece, Comoros, Finland, Suriname, Zimbabwe, Senegal, Panama, Andorra. A well-developed logistics system and a partnership network cheer us to conduct our products anywhere in the globe on-time without damaging product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To request or order, call us by phone or write to the online chat on our site. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material | Hardness | Straight | Stepped Straight | |
Type | Type | |||
P0 -0.02 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPSC | KJPDC | KJPGDC |
EN 1.1191 Equiv. | 45HRC~ | KJPSHC | KJPDHC | KJPGDHC |
EN 1.4301 Equiv. | - | KJPSCS | KJPDCS | - |
1 EN 1.4125 Equiv. | 45~50HRC | KJPSCC | - | KJPGDCC |
Part Number (TYPE, D) | - | P | - | W | - | S | - | F | - | L | - | B |
KJPDC16 | - | P10.97 | - | W8.47 | - | S6.00 | - | F2.0 | - | L5 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | M | ||||||
Straight | Stepped Straight | D | P | W | S Stepped Type only | F(FS/2) Stepped Type only | L | B Stepped Type only | ||
(P0 -0.02) | (S0 -0.02/F0 -0.05) | (Sg6/F0 -0.03) | ||||||||
(EN 1.1191 Equiv.) KJPSC (EN 1.1191 Equiv. Hardened) KJPSHC (EN 1.4301 Equiv.) KJPSCS (EN 1.4125 Equiv.) KJPSCC | (EN 1.1191 Equiv.) KJPDC (EN 1.1191 Equiv. Hardened) KJPDHC (EN 1.4301 Equiv.) KJPDCS | (EN 1.1191 Equiv.) KJPGDC (EN 1.1191 Equiv. Hardened) KJPGDHC (EN 1.4125 Equiv.) KJPGDCC | 8 | 4.00~6.00 | P>W>S (W3.01) | 3.00~5.00 | 0.3~2.5 | Straight 5~30*1 Stepped Straight 5~20 | 5~20 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.5 | M5 | ||||||
12 | 4.00~10.00 | 3.00~9.00 | 0.5~4.5 | M5 | ||||||
16 | 6.00~14.00 | 4.00~13.00 | 0.5~6.5 | M5 | ||||||
20 | 10.00~18.00 | 6.00~17.00 | 1.0~8.5 | M5 | ||||||
25 | 14.00~22.00 | 8.00~21.00 | 2.0~10.5 | M5 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.5 | M5 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.5 | M5 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~12.0 | M5 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.5 | M5 |