We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGDHC16-P[8-14/0.01]-W[5-14/0.01]-S[5-13/0.01]-F[1-6/0.1]-L[5-20/1]-B[5-20/1]
Description
Slot Pins for Inspection Jigs/Oval Straight Type
Stock availability:
On request
If you are seeking MISUMI KJPGDHC16-P[8-14/0.01]-W[5-14/0.01]-S[5-13/0.01]-F[1-6/0.1]-L[5-20/1]-B[5-20/1], reach FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are outlined in the quality of merchandises and private attention to each orderer. We value everyone, who conspired with us - thus, our regular consumers obtain the most acceptable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such clients, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the planet Germany, United Kingdom, Brazil, Bahamas, Papua New Guinea, Argentina, Jamaica, The Gambia, Laos, Cape Verde, Cameroon, Equatorial Guinea, Togo, Malaysia, Egypt, Cyprus, China, Uganda, Mauritius, Serbia, Zimbabwe, Montenegro, Japan, Bolivia, Finland, Switzerland, Algeria, Mauritania, Ireland, Niger, South Korea, Swaziland, Uruguay, Morocco, Greece, El Salvador, Namibia, Afghanistan, Pakistan, Dominica, Angola, Thailand, Vietnam, Eswatini. A well-shaped logistics link and a partnership network assist us to send our products anywhere in the planet immediately without damaging product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this quantity is rising every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as keep on top of it.
To request or order, call us by phone or write to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Hardness | Straight | Stepped Straight | |
Type | Type | |||
P0 -0.02 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPSC | KJPDC | KJPGDC |
EN 1.1191 Equiv. | 45HRC~ | KJPSHC | KJPDHC | KJPGDHC |
EN 1.4301 Equiv. | - | KJPSCS | KJPDCS | - |
1 EN 1.4125 Equiv. | 45~50HRC | KJPSCC | - | KJPGDCC |
Part Number (TYPE, D) | - | P | - | W | - | S | - | F | - | L | - | B |
KJPDC16 | - | P10.97 | - | W8.47 | - | S6.00 | - | F2.0 | - | L5 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | M | ||||||
Straight | Stepped Straight | D | P | W | S Stepped Type only | F(FS/2) Stepped Type only | L | B Stepped Type only | ||
(P0 -0.02) | (S0 -0.02/F0 -0.05) | (Sg6/F0 -0.03) | ||||||||
(EN 1.1191 Equiv.) KJPSC (EN 1.1191 Equiv. Hardened) KJPSHC (EN 1.4301 Equiv.) KJPSCS (EN 1.4125 Equiv.) KJPSCC | (EN 1.1191 Equiv.) KJPDC (EN 1.1191 Equiv. Hardened) KJPDHC (EN 1.4301 Equiv.) KJPDCS | (EN 1.1191 Equiv.) KJPGDC (EN 1.1191 Equiv. Hardened) KJPGDHC (EN 1.4125 Equiv.) KJPGDCC | 8 | 4.00~6.00 | P>W>S (W3.01) | 3.00~5.00 | 0.3~2.5 | Straight 5~30*1 Stepped Straight 5~20 | 5~20 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.5 | M5 | ||||||
12 | 4.00~10.00 | 3.00~9.00 | 0.5~4.5 | M5 | ||||||
16 | 6.00~14.00 | 4.00~13.00 | 0.5~6.5 | M5 | ||||||
20 | 10.00~18.00 | 6.00~17.00 | 1.0~8.5 | M5 | ||||||
25 | 14.00~22.00 | 8.00~21.00 | 2.0~10.5 | M5 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.5 | M5 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.5 | M5 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~12.0 | M5 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.5 | M5 |