We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPGTS6S-P[2-10/0.01]-L[2-12/1]-B[2-20/0.1]
Description
Setscrew Mounting Shank/Circumference Groove
Stock availability:
On request
If you are questing MISUMI CJPGTS6S-P[2-10/0.01]-L[2-12/1]-B[2-20/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each user. We praise everyone, who collaborated with us - so, our regular customers pick up the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Dominican Republic, France, Austria, Vietnam, Greece, Mongolia, Myanmar, Kenya, Kiribati, Samoa, Lebanon, Romania, Guatemala, Serbia, Burkina Faso, Nicaragua, Dominica, Mauritius, Philippines, Indonesia, Benin, Mali, Liberia, United States, Cameroon, Haiti, Australia, Nepal, Syria, Bosnia and Herzegovina, Angola, North Korea, Cyprus, Malaysia, Russia, Swaziland, Albania, Georgia, Jamaica, Morocco, Cape Verde, Botswana, Ukraine, Seychelles, Mozambique. A well-elaborated logistics chains and a partnership network help us to deliver our goods anywhere in the planet promptly without disreputing product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To request or place an order, phone us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGT | JPCT | JPDT | S (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPGT | GJPCT | GJPDT | ||
EN 1.4301 Equiv. | - | - | SJPGT | - | SJPDT | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJPGT | HJPCT | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPGT | CJPCT | CJPDT |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGTS10 JPDTD10 | - - | P12.00 P10.05 | - - | L6 L22 | - - | B3.5 B7.5 | - | G5 | - | A14.3 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | m | C1 | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||
JPGT GJPGT SJPGT HJPGT CJPGT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~10.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 3 | 1 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | ||||||||||
8 | -0.005 -0.014 | 3.00~13.00 | 4~16 | 6.5 | 6 | 6 | 4 | 1.5 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | ||||||||||
10 | 3.00~15.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | ||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 6~24 | 10 | 8 | 2 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | ||||||||||
16 | 10.00~25.00 | 8~32 | 5.0~20.0 | 14 | 8 | 5 | 3 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | ||||||||||
20 | -0.007 -0.020 | 13.00~30.00 | 10~40 | 18 | 8 | 3 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | C | m | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||||||||
(Notched) JPCT GJPCT HJPCT CJPCT | (Set Screw Flat) JPDT GJPDT SJPDT CJPDT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~10.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Applicable to Diamond Shape Type only. | 5.5 | 2.5 | 1.0 | 1 | 3 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~13.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~15.00 | 15~25 | 2.0~16.0 | 2 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 15~25 | 2.0~20.0 | 5 | 2.5 | |||||||||||||
16 | 10.00~25.00 | 15~35 | 2.0~28.0 | 10.5 | 5.5 | 2.0 | 3 | 5 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~30.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 9 | 5 |