We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPQNBB6-7
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing MISUMI JPQNBB6-7, reach FAMAGA, the world's primary vendor of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of spare parts and private attention to each orderer. We esteem everyone, who cooperated with us - therefore, our regular consumers procure the most acceptable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 3500 such customers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Dominican Republic, Eswatini, Colombia, Afghanistan, Bangladesh, New Zealand, Malaysia, Ghana, Senegal, Syria, Ukraine, Georgia, Tajikistan, Morocco, Romania, Pakistan, Norway, Burkina Faso, Jordan, Costa Rica, Sudan, Fiji, Laos, Haiti, Hungary, United Arab Emirates, Tanzania, China, Finland, Guatemala, Rwanda, Seychelles, Poland, United States, Kenya, Sweden, India, Mauritania, Belarus, Estonia, Swaziland, Mauritius, Montenegro, Cyprus, Andorra. A well-developed logistics system and a partnership network guide us to dispatch our units anywhere in the earth immediately without undermining product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is rising every day. We are happy that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To consult or place an order, get in touch with us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
| P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
| EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
| EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
| EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
| EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
| EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
| EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
| EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
| Part Number | - | P | - | L | - | B | - | ML |
| JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
| Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
| Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
| JPQN SJPQN CJPQN | BB (Round) | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 5 | M3 | 147 | 4.5 | |||||||||
| 4 | -0.004 -0.012 | 5 | 6 | 7 | 6 | M4 | 333 | 6 | ||||||||||||
| 5 | 6 | 7 | 8 | 3 | M5 | 676 | 7.5 | |||||||||||||
| 6 | 7 | 8 | 9 | 10 | 8 | M6 | 1156 | 9 | ||||||||||||
| 8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
| 10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
| 12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
| Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
| Type | Shape | D | D dim. Tolerance g6 | |||||||
| JPQN GJPQN SJPQN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 5 | M3 | 147 | 4.5 | 1.5 |
| 4 | -0.004 -0.012 | 4.50~7.00 | 6 | M4 | 333 | 6 | 1.8 | |||
| 5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | 2.2 | ||||
| 6 | 6.50~10.00 | 8 | M6 | 1156 | 9 | 3 | ||||
| 8 | -0.005 -0.014 | 9.00~13.00 | 5 | M8 | 2803 | 12 | 3.5 | |||
| 10 | 11.00~15.00 | 10 | M10 | 5557 | 15 | 4 | ||||
| 12 | -0.006 -0.017 | 13.00~18.00 | 8 | M12 | 9702 | 18 | 5 | |||
| 16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
| Type | Shape | D | D dim. Tolerance g6 | |||||||
| FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | 4.5 | 1.5 |
| 4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | 6 | 1.8 | ||
| 5 | 5.50~8.00 | 3~10 | 2.0~10.0 | M5 | 676 | 7.5 | 2.2 | |||
| 6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | 9 | 3 | |||
| 8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | 12 | 3.5 | ||
| 10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | 15 | 4 | |||
| 12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | M12 | 9702 | 18 | 5 | ||
| 16 | 17.00~25.00 | 8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
| 20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
| Type | Shape | D | D dim. Tolerance g6 | |||||||
| FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
| 4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | 4~12 | M4 | 333 | 1.8 | ||
| 5 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5~15 | M5 | 676 | 2.2 | |||
| 6 | 6.50~10.00 | 3~10 | 2.0~12.0 | 6~18 | M6 | 1156 | 3 | |||
| 8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | 8~24 | M8 | 2803 | 3.5 | ||
| 10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 10~30 | M10 | 5557 | 4 | |||
| 12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 12~30 | M12 | 9702 | 5 | ||
| 16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
| 20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |
