We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPQNA10-[11-15/0.01]
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are pursuing MISUMI HJPQNA10-[11-15/0.01], reach FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are depicted in the quality of outcomes and private attention to each orderer. We understand everyone, who worked with us - so, our regular consumers procure the most beneficial purchase conditions and discounts on the factory-made equipment market. Now, there are more than 3500 such clients, and we constantly arrange new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Nicaragua, Burma, Namibia, Eritrea, Haiti, Malawi, Bhutan, Honduras, Finland, Oman, Sierra Leone, Colombia, Monaco, Niger, Luxembourg, Chad, Latvia, Moldova, Suriname, Armenia, The Gambia, Angola, Bolivia, Libya, Philippines, New Zealand, Benin, Argentina, Belarus, Mexico, Swaziland, Central African Republic, East Timor, Dominica, Brunei, Brazil, Croatia, Hungary, Nepal, Morocco, South Korea, Tunisia, Switzerland, Bosnia and Herzegovina, Pakistan, Greece. A well-developed logistics chains and a partnership network guide us to ship our goods anywhere in the planet quickly without disreputing product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this amount is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 5 | M3 | 147 | 4.5 | |||||||||
4 | -0.004 -0.012 | 5 | 6 | 7 | 6 | M4 | 333 | 6 | ||||||||||||
5 | 6 | 7 | 8 | 3 | M5 | 676 | 7.5 | |||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | M6 | 1156 | 9 | ||||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 5 | M3 | 147 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 6 | M4 | 333 | 6 | 1.8 | |||
5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | 2.2 | ||||
6 | 6.50~10.00 | 8 | M6 | 1156 | 9 | 3 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | M8 | 2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | 5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8 | M12 | 9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | 6 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | M5 | 676 | 7.5 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | 9 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | M12 | 9702 | 18 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | 4~12 | M4 | 333 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5~15 | M5 | 676 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | 6~18 | M6 | 1156 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | 8~24 | M8 | 2803 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 10~30 | M10 | 5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 12~30 | M12 | 9702 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |