We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPQNLD4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]-ML[4-12/1]
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are questing MISUMI GFPQNLD4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]-ML[4-12/1], catch up with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are portrayed in the quality of products and particular attention to each orderer. We admire everyone, who conspired with us - therefore, our regular buyers obtain the most attractive purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such customers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Tanzania, Angola, Latvia, Bhutan, Philippines, Georgia, Myanmar, Burundi, Romania, Libya, Turkmenistan, Belize, Andorra, Yemen, Israel, Malaysia, Algeria, Indonesia, Gambia, Belarus, India, Moldova, Syria, Iceland, Ghana, Madagascar, Iran, Sudan, Liechtenstein, Malta, Bosnia and Herzegovina, Brunei, Mongolia, Nepal, Antigua and Barbuda, Jamaica, New Zealand, Estonia, Argentina, Kiribati, Austria, Mexico. A advanced logistics network and a partnership network let us to deliver our elements anywhere in the world as soon as possible without undermining product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as stay in control.
To ask a question or book, phone us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 5 | M3 | 147 | 4.5 | |||||||||
4 | -0.004 -0.012 | 5 | 6 | 7 | 6 | M4 | 333 | 6 | ||||||||||||
5 | 6 | 7 | 8 | 3 | M5 | 676 | 7.5 | |||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | M6 | 1156 | 9 | ||||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 5 | M3 | 147 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 6 | M4 | 333 | 6 | 1.8 | |||
5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | 2.2 | ||||
6 | 6.50~10.00 | 8 | M6 | 1156 | 9 | 3 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | M8 | 2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | 5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8 | M12 | 9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | 6 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | M5 | 676 | 7.5 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | 9 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | M12 | 9702 | 18 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | 4~12 | M4 | 333 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5~15 | M5 | 676 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | 6~18 | M6 | 1156 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | 8~24 | M8 | 2803 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 10~30 | M10 | 5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 12~30 | M12 | 9702 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |