We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPQNLD20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1]-ML[20-40/1]
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are looking for MISUMI GFPQNLD20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1]-ML[20-40/1], call FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are portrayed in the quality of spare parts and private attention to each orderer. We cherish everyone, who conspired with us - so, our regular consumers bring in the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such buyers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Norway, The Gambia, Madagascar, Grenada, Croatia, Jamaica, Palestine, Jordan, Eritrea, Paraguay, Liechtenstein, Burundi, Denmark, Swaziland, Rwanda, Qatar, Iraq, Brunei, Uzbekistan, Burkina Faso, Armenia, Brazil, East Timor, Mongolia, Montenegro, Indonesia, Australia, Equatorial Guinea, North Korea, Azerbaijan, Yemen, Laos, Morocco, Tunisia, Philippines, Uruguay, Luxembourg, Moldova, India, Kazakhstan, Afghanistan. A advanced logistics connection and a partnership network assist us to conduct our units anywhere in the world with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as to stay on the top.
To inquire or order, get in touch with us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 5 | M3 | 147 | 4.5 | |||||||||
4 | -0.004 -0.012 | 5 | 6 | 7 | 6 | M4 | 333 | 6 | ||||||||||||
5 | 6 | 7 | 8 | 3 | M5 | 676 | 7.5 | |||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | M6 | 1156 | 9 | ||||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 5 | M3 | 147 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 6 | M4 | 333 | 6 | 1.8 | |||
5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | 2.2 | ||||
6 | 6.50~10.00 | 8 | M6 | 1156 | 9 | 3 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | M8 | 2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | 5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8 | M12 | 9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | 6 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | M5 | 676 | 7.5 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | 9 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | M12 | 9702 | 18 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | 4~12 | M4 | 333 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5~15 | M5 | 676 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | 6~18 | M6 | 1156 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | 8~24 | M8 | 2803 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 10~30 | M10 | 5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 12~30 | M12 | 9702 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |