We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPQNBB5-6
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are questing MISUMI CJPQNBB5-6, get in touch with FAMAGA, the world's central company of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of spare parts and private attention to each consumer. We esteem everyone, who joined with us - therefore, our regular consumers pick up the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Dominican Republic, Algeria, Panama, Vietnam, San Marino, Guinea, Indonesia, Guinea-Bissau, Sierra Leone, Costa Rica, Luxembourg, Sweden, Russia, Mauritius, Oman, Pakistan, Singapore, Georgia, Paraguay, Finland, Benin, Morocco, Cape Verde, The Gambia, Jordan, Mexico, Malaysia, Niger, Ireland, Mauritania, Senegal, Fiji, Dominica, Madagascar, Zimbabwe, Bosnia and Herzegovina, Yemen, Togo, Samoa, Kenya, Seychelles. A well-built logistics bond and a partnership network assist us to dispatch our units anywhere in the world as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or place an order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 5 | M3 | 147 | 4.5 | |||||||||
4 | -0.004 -0.012 | 5 | 6 | 7 | 6 | M4 | 333 | 6 | ||||||||||||
5 | 6 | 7 | 8 | 3 | M5 | 676 | 7.5 | |||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | M6 | 1156 | 9 | ||||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 5 | M3 | 147 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 6 | M4 | 333 | 6 | 1.8 | |||
5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | 2.2 | ||||
6 | 6.50~10.00 | 8 | M6 | 1156 | 9 | 3 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | M8 | 2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | 5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8 | M12 | 9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | 6 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | M5 | 676 | 7.5 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | 9 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | M12 | 9702 | 18 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | 4~12 | M4 | 333 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5~15 | M5 | 676 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | 6~18 | M6 | 1156 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | 8~24 | M8 | 2803 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 10~30 | M10 | 5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 12~30 | M12 | 9702 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |