We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPGJD6S-P[2-6/0.01]-L[2-12/1]-B[2-20/0.1]
Description
Shoulder/Set Screw Mounting Shank/Notch Shape
Stock availability:
On request
If you are looking for MISUMI JPGJD6S-P[2-6/0.01]-L[2-12/1]-B[2-20/0.1], reach FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and personalseparate attention to each purchaser. We respect everyone, who cooperated with us - so, our regular buyers bring in the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Morocco, Sweden, Djibouti, Namibia, Russia, The Bahamas, China, Nicaragua, Netherlands, Tajikistan, Kenya, Armenia, Grenada, Guyana, United States, Madagascar, Croatia, Eritrea, Uzbekistan, Cape Verde, Haiti, Latvia, Kazakhstan, Eswatini, Swaziland, Lithuania, Panama, Georgia, The Gambia, Malta, Vietnam, Benin, Hungary, Poland, Ireland, Macedonia, Mongolia, Mozambique, Comoros, Pakistan, East Timor, Philippines, Uganda, Luxembourg, Iceland. A well-built logistics system and a partnership network assist us to send our products anywhere in the planet on-time without damaging product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that users choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGJ | JPCJ | JPDJ | S (Round) D (Diamond) |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGJS10 JPCJD8 | - - | P9.05 P5.05 | - - | L6 L20 | - - | B3.5 B10.1 | - | G5 | - | A8.2 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | C1 | m | H | (W) | ||||
Type | Shape Code | D | D dim. Tolerance g6 | When D | When DP | |||||||||
JPGJ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~6.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 1 | 3 | 8 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | |||||||||||
8 | -0.005 -0.014 | 3.00~8.00 | 4~16 | 6.5 | 6 | 6 | 1.5 | 4 | 11 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | |||||||||||
10 | 3.00~10.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 13 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | |||||||||||
12 | -0.006 -0.017 | 5.00~12.00 | 6~24 | 10 | 8 | 2 | 15 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | |||||||||||
16 | 10.00~16.00 | 8~32 | 5.0~20.0 | 14 | 8 | 3 | 5 | 19 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | |||||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 10~40 | 18 | 8 | 3 | 23 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | c | m | H | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape Code | D | D dim. Tolerance g6 | When D | When DP | |||||||||||||||
(Notched) JPCJ | (Set Screw Flat) JPDJ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~7.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Diamond Applicable to Shape only | 5.5 | 2.5 | 1 | 1 | 3 | 8 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~9.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | 11 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~11.00 | 15~25 | 2.0~16.0 | 2 | 13 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~12.00 | 15~25 | 2.0~20.0 | 15 | 5 | 2.5 | |||||||||||||
16 | 10.00~16.00 | 24~35 | 2.0~28.0 | 10.5 | 5.5 | 2 | 3 | 5 | 19 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 23 | 9 | 5 |