We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPGJD20-P[13-20/0.01]-L[10-40/1]-B[5-20/0.1]
Description
Shoulder/Set Screw Mounting Shank/Notch Shape
Stock availability:
On request
If you are pursuing MISUMI JPGJD20-P[13-20/0.01]-L[10-40/1]-B[5-20/0.1], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each orderer. We value everyone, who joined with us - so, our regular consumers get the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Suriname, Dominica, China, Argentina, El Salvador, Guyana, Cape Verde, Fiji, Japan, France, Ukraine, Nigeria, Malawi, Nicaragua, Ireland, Indonesia, Malaysia, Netherlands, Turkmenistan, Estonia, Zimbabwe, Madagascar, Ghana, Tanzania, Kuwait, Greece, United Arab Emirates, Jamaica, Georgia, North Korea, Switzerland, United States, Israel, Mozambique, Guatemala, Kiribati, Laos, Seychelles, Mexico, Botswana, Mauritius, Croatia, Bangladesh, Serbia, Mongolia. A well-built logistics series and a partnership network let us to ship our products anywhere in the world immediately without compromising product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or make a request, call us by phone or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGJ | JPCJ | JPDJ | S (Round) D (Diamond) |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGJS10 JPCJD8 | - - | P9.05 P5.05 | - - | L6 L20 | - - | B3.5 B10.1 | - | G5 | - | A8.2 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | C1 | m | H | (W) | ||||
Type | Shape Code | D | D dim. Tolerance g6 | When D | When DP | |||||||||
JPGJ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~6.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 1 | 3 | 8 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | |||||||||||
8 | -0.005 -0.014 | 3.00~8.00 | 4~16 | 6.5 | 6 | 6 | 1.5 | 4 | 11 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | |||||||||||
10 | 3.00~10.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 13 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | |||||||||||
12 | -0.006 -0.017 | 5.00~12.00 | 6~24 | 10 | 8 | 2 | 15 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | |||||||||||
16 | 10.00~16.00 | 8~32 | 5.0~20.0 | 14 | 8 | 3 | 5 | 19 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | |||||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 10~40 | 18 | 8 | 3 | 23 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | c | m | H | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape Code | D | D dim. Tolerance g6 | When D | When DP | |||||||||||||||
(Notched) JPCJ | (Set Screw Flat) JPDJ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~7.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Diamond Applicable to Shape only | 5.5 | 2.5 | 1 | 1 | 3 | 8 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~9.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | 11 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~11.00 | 15~25 | 2.0~16.0 | 2 | 13 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~12.00 | 15~25 | 2.0~20.0 | 15 | 5 | 2.5 | |||||||||||||
16 | 10.00~16.00 | 24~35 | 2.0~28.0 | 10.5 | 5.5 | 2 | 3 | 5 | 19 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 23 | 9 | 5 |