We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPGJD10-P[3-10/0.01]-L[5-20/1]-B[3-20/0.1]
Description
Shoulder/Set Screw Mounting Shank/Notch Shape
Stock availability:
On request
If you are questing MISUMI JPGJD10-P[3-10/0.01]-L[5-20/1]-B[3-20/0.1], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of spare parts and individual attention to each buyer. We admire everyone, who liased with us - so, our regular customers procure the most beneficial purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Syria, Mauritius, Luxembourg, Niger, Georgia, South Sudan, Serbia, El Salvador, Guyana, Belgium, India, Laos, Liberia, Russia, Mauritania, Swaziland, Panama, The Bahamas, Ecuador, Peru, Malawi, Yemen, Senegal, Ukraine, Suriname, Argentina, Bolivia, Malaysia, Croatia, Denmark, Djibouti, Egypt, Czech Republic, Mexico, Belarus, Nigeria, Greece, Afghanistan, Madagascar, Ireland, Zimbabwe, Cyprus, Algeria, Finland, Lithuania. A well-developed logistics network and a partnership network let us to send our products anywhere in the world immediately without damaging product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is amounting every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To ask a question or place an order, call us by phone or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGJ | JPCJ | JPDJ | S (Round) D (Diamond) |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGJS10 JPCJD8 | - - | P9.05 P5.05 | - - | L6 L20 | - - | B3.5 B10.1 | - | G5 | - | A8.2 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | C1 | m | H | (W) | ||||
Type | Shape Code | D | D dim. Tolerance g6 | When D | When DP | |||||||||
JPGJ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~6.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 1 | 3 | 8 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | |||||||||||
8 | -0.005 -0.014 | 3.00~8.00 | 4~16 | 6.5 | 6 | 6 | 1.5 | 4 | 11 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | |||||||||||
10 | 3.00~10.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 13 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | |||||||||||
12 | -0.006 -0.017 | 5.00~12.00 | 6~24 | 10 | 8 | 2 | 15 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | |||||||||||
16 | 10.00~16.00 | 8~32 | 5.0~20.0 | 14 | 8 | 3 | 5 | 19 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | |||||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 10~40 | 18 | 8 | 3 | 23 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | c | m | H | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape Code | D | D dim. Tolerance g6 | When D | When DP | |||||||||||||||
(Notched) JPCJ | (Set Screw Flat) JPDJ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~7.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Diamond Applicable to Shape only | 5.5 | 2.5 | 1 | 1 | 3 | 8 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~9.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | 11 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~11.00 | 15~25 | 2.0~16.0 | 2 | 13 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~12.00 | 15~25 | 2.0~20.0 | 15 | 5 | 2.5 | |||||||||||||
16 | 10.00~16.00 | 24~35 | 2.0~28.0 | 10.5 | 5.5 | 2 | 3 | 5 | 19 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 23 | 9 | 5 |