We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPDJS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-G[3-9/1]-A[2-8/0.1]
Description
Shoulder/Set Screw Mounting Shank/Notch Shape
Stock availability:
On request
If you are looking for MISUMI JPDJS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-G[3-9/1]-A[2-8/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and personalseparate attention to each user. We praise everyone, who collaborated with us - so, our regular customers pick up the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the earth Germany, United Kingdom, East Timor, Costa Rica, Serbia, Slovakia, Jamaica, Russia, Peru, Angola, Nicaragua, Lebanon, Armenia, Zambia, Gambia, El Salvador, Belarus, Kuwait, United Arab Emirates, Guyana, Belize, Albania, Saudi Arabia, Swaziland, Turkey, Macedonia, Sweden, Moldova, Togo, Qatar, Malaysia, Eswatini, China, Mauritania, Libya, Afghanistan, Burkina Faso, Iceland, Mali, Latvia, Indonesia, Guatemala, Tajikistan, Panama, Iraq, Samoa, Greece. A well-elaborated logistics bond and a partnership network cheer us to dispatch our elements anywhere in the world with no delay without undermining product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as stay in control.
To consult or place an order, contact us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGJ | JPCJ | JPDJ | S (Round) D (Diamond) |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGJS10 JPCJD8 | - - | P9.05 P5.05 | - - | L6 L20 | - - | B3.5 B10.1 | - | G5 | - | A8.2 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | C1 | m | H | (W) | ||||
Type | Shape Code | D | D dim. Tolerance g6 | When D | When DP | |||||||||
JPGJ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~6.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 1 | 3 | 8 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | |||||||||||
8 | -0.005 -0.014 | 3.00~8.00 | 4~16 | 6.5 | 6 | 6 | 1.5 | 4 | 11 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | |||||||||||
10 | 3.00~10.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 13 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | |||||||||||
12 | -0.006 -0.017 | 5.00~12.00 | 6~24 | 10 | 8 | 2 | 15 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | |||||||||||
16 | 10.00~16.00 | 8~32 | 5.0~20.0 | 14 | 8 | 3 | 5 | 19 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | |||||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 10~40 | 18 | 8 | 3 | 23 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | c | m | H | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape Code | D | D dim. Tolerance g6 | When D | When DP | |||||||||||||||
(Notched) JPCJ | (Set Screw Flat) JPDJ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~7.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Diamond Applicable to Shape only | 5.5 | 2.5 | 1 | 1 | 3 | 8 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~9.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | 11 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~11.00 | 15~25 | 2.0~16.0 | 2 | 13 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~12.00 | 15~25 | 2.0~20.0 | 15 | 5 | 2.5 | |||||||||||||
16 | 10.00~16.00 | 24~35 | 2.0~28.0 | 10.5 | 5.5 | 2 | 3 | 5 | 19 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 23 | 9 | 5 |