We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPDSPC8-[3-8/0.01]
Description
Small Flat Head/Standard/P Configurable
Stock availability:
On request
If you are questing MISUMI JPDSPC8-[3-8/0.01], reach FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of products and individual attention to each user. We admire everyone, who collaborated with us - so, our regular clients accept the most favorable purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Spain, Djibouti, Armenia, Papua New Guinea, Sweden, Lebanon, Colombia, Guinea, Nepal, Canada, Indonesia, Benin, Chile, Oman, Georgia, Kazakhstan, Egypt, Kuwait, Zimbabwe, Madagascar, Libya, Finland, Mozambique, Monaco, Guatemala, Qatar, The Bahamas, Mauritius, East Timor, Iraq, South Sudan, North Korea, Peru, Pakistan, Greece, Estonia, Philippines, Brunei, Vietnam, United States, Niger, Cape Verde, Thailand, Haiti, Swaziland, Bolivia, Togo. A well-shaped logistics system and a partnership network assist us to ship our products anywhere in the globe on-time without discrediting product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | D Tolerance Code | ||
P Selectable | P Configurable | P, L, B Configurable | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDB | JPDS | FPDS | C (m6) PC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPDS | GFPDS | ||
EN 1.2510 Equiv. | - | - | - | - | BFPDS | ||
EN 1.4301 Equiv.* | - | - | SJPDB | SJPDS | SFPDS | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | HJPDS | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | - | CFPDS |
Part Number | - | P | - | L | - | B |
JPDSC4 FPDSC4 | - - | 2.55 P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | |||||||||||||
Type | D Tol. | D | D dim. Tolerance | ||||||||||||||
m6 | p6 | ||||||||||||||||
JPDB SJPDB | C (m6) PC (p6) | 3 | +0.008 +0.002 | +0.012 +0.006 | 2 | 5 | 3 | 1 | 0.1 | ||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 0.5 | ||||||||||||
5 | 2 | 3 | 4 | 8 | |||||||||||||
6 | 3 | 4 | 5 | 10 | 4 | ||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 4 | 5 | 6 | 12 | 2 | 1 | |||||||||
10 | 5 | 6 | 7 | 8 | 16 | 5 | |||||||||||
16 | +0.018 +0.007 | +0.029 +0.018 | 10 | 13 | 22 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
JPDS GJPDS SJPDS HJPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 4 | 3 | 0 | 0.1 |
3 | 1.50~3.00 | 5 | 1 | ||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 0.5 | |||||
5 | 2.00~5.00 | 8 | |||||||
6 | 2.00~6.00 | 10 | 4 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 12 | 2 | 1 | |||
10 | 3.00~10.00 | 16 | 5 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 20 | 6 | 1.5 | |||
13 | 6.00~13.00 | 22 | 10 | 2 | |||||
16 | 10.00~16.00 | 12 | 3 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
FPDS GFPDS BFPDS SFPDS CFPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 2~4 | 3.0~10.0 | 0 | 0.1 |
3 | 1.50~3.00 | 3~6 | 3.0~10.0 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 4.0~10.0 | 0.5 | |||
5 | 2.00~5.00 | 5~10 | 4.0~10.0 | ||||||
6 | 2.00~6.00 | 6~12 | 4.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 6.0~15.0 | 1 | |||
10 | 3.00~10.00 | 10~20 | 6.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 6.0~20.0 | 1.5 | |||
13 | 6.00~13.00 | 13~26 | 6.0~20.0 | 2 | |||||
16 | 10.00~16.00 | 16~32 | 7.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 7.0~20.0 |