We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPDSPC16-P[10-16/0.01]-L[16-32/1]-B[7-20/0.1]
Description
Small Flat Head/Standard/P Configurable
Stock availability:
On request
If you are seeking MISUMI GFPDSPC16-P[10-16/0.01]-L[16-32/1]-B[7-20/0.1], catch up with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each buyer. We value everyone, who liased with us - hence, our regular purchasers procure the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such clients, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Comoros, Liberia, Iran, Suriname, New Zealand, Namibia, Afghanistan, India, Belize, Moldova, Poland, Tunisia, Tanzania, Nepal, Libya, Malawi, Kiribati, China, Algeria, Georgia, Iraq, Sudan, Turkmenistan, Cameroon, Kenya, Greece, Croatia, Turkey, Bolivia, Niger, Hungary, Mongolia, Uruguay, Antigua and Barbuda, Sweden, Nigeria, Serbia. A well-shaped logistics link and a partnership network assist us to send our units anywhere in the planet with no delay without discrediting product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To request or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | D Tolerance Code | ||
P Selectable | P Configurable | P, L, B Configurable | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDB | JPDS | FPDS | C (m6) PC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPDS | GFPDS | ||
EN 1.2510 Equiv. | - | - | - | - | BFPDS | ||
EN 1.4301 Equiv.* | - | - | SJPDB | SJPDS | SFPDS | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | HJPDS | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | - | CFPDS |
Part Number | - | P | - | L | - | B |
JPDSC4 FPDSC4 | - - | 2.55 P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | |||||||||||||
Type | D Tol. | D | D dim. Tolerance | ||||||||||||||
m6 | p6 | ||||||||||||||||
JPDB SJPDB | C (m6) PC (p6) | 3 | +0.008 +0.002 | +0.012 +0.006 | 2 | 5 | 3 | 1 | 0.1 | ||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 0.5 | ||||||||||||
5 | 2 | 3 | 4 | 8 | |||||||||||||
6 | 3 | 4 | 5 | 10 | 4 | ||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 4 | 5 | 6 | 12 | 2 | 1 | |||||||||
10 | 5 | 6 | 7 | 8 | 16 | 5 | |||||||||||
16 | +0.018 +0.007 | +0.029 +0.018 | 10 | 13 | 22 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
JPDS GJPDS SJPDS HJPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 4 | 3 | 0 | 0.1 |
3 | 1.50~3.00 | 5 | 1 | ||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 0.5 | |||||
5 | 2.00~5.00 | 8 | |||||||
6 | 2.00~6.00 | 10 | 4 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 12 | 2 | 1 | |||
10 | 3.00~10.00 | 16 | 5 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 20 | 6 | 1.5 | |||
13 | 6.00~13.00 | 22 | 10 | 2 | |||||
16 | 10.00~16.00 | 12 | 3 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
FPDS GFPDS BFPDS SFPDS CFPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 2~4 | 3.0~10.0 | 0 | 0.1 |
3 | 1.50~3.00 | 3~6 | 3.0~10.0 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 4.0~10.0 | 0.5 | |||
5 | 2.00~5.00 | 5~10 | 4.0~10.0 | ||||||
6 | 2.00~6.00 | 6~12 | 4.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 6.0~15.0 | 1 | |||
10 | 3.00~10.00 | 10~20 | 6.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 6.0~20.0 | 1.5 | |||
13 | 6.00~13.00 | 13~26 | 6.0~20.0 | 2 | |||||
16 | 10.00~16.00 | 16~32 | 7.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 7.0~20.0 |