We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CFPDSPC8-P[3-8/0.01]-L[8-16/1]-B[6-15/0.1]
Description
Small Flat Head/Standard/P Configurable
Stock availability:
On request
If you are seeking MISUMI CFPDSPC8-P[3-8/0.01]-L[8-16/1]-B[6-15/0.1], communicate with FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of items and particular attention to each buyer. We appreciate everyone, who worked with us - so, our regular buyers obtain the most flexible purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, South Sudan, United Arab Emirates, Tanzania, Togo, Guyana, Macedonia, Belgium, Samoa, Yemen, Mali, Ecuador, Romania, Morocco, Haiti, Peru, Norway, Malta, Netherlands, Japan, Hungary, Australia, Poland, Israel, Latvia, Suriname, Tajikistan, Tonga, The Gambia, Central African Republic, Guatemala, Bosnia and Herzegovina, Djibouti, Nigeria, Czech Republic, Nepal, Comoros, Malaysia, Cyprus. A well-elaborated logistics series and a partnership network cheer us to send our items anywhere in the earth quickly without discrediting product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of industrial equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been delivered, and this number is growing every day. We are happy that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To consult or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | D Tolerance Code | ||
P Selectable | P Configurable | P, L, B Configurable | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDB | JPDS | FPDS | C (m6) PC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPDS | GFPDS | ||
EN 1.2510 Equiv. | - | - | - | - | BFPDS | ||
EN 1.4301 Equiv.* | - | - | SJPDB | SJPDS | SFPDS | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | HJPDS | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | - | CFPDS |
Part Number | - | P | - | L | - | B |
JPDSC4 FPDSC4 | - - | 2.55 P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | |||||||||||||
Type | D Tol. | D | D dim. Tolerance | ||||||||||||||
m6 | p6 | ||||||||||||||||
JPDB SJPDB | C (m6) PC (p6) | 3 | +0.008 +0.002 | +0.012 +0.006 | 2 | 5 | 3 | 1 | 0.1 | ||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 0.5 | ||||||||||||
5 | 2 | 3 | 4 | 8 | |||||||||||||
6 | 3 | 4 | 5 | 10 | 4 | ||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 4 | 5 | 6 | 12 | 2 | 1 | |||||||||
10 | 5 | 6 | 7 | 8 | 16 | 5 | |||||||||||
16 | +0.018 +0.007 | +0.029 +0.018 | 10 | 13 | 22 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
JPDS GJPDS SJPDS HJPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 4 | 3 | 0 | 0.1 |
3 | 1.50~3.00 | 5 | 1 | ||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 0.5 | |||||
5 | 2.00~5.00 | 8 | |||||||
6 | 2.00~6.00 | 10 | 4 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 12 | 2 | 1 | |||
10 | 3.00~10.00 | 16 | 5 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 20 | 6 | 1.5 | |||
13 | 6.00~13.00 | 22 | 10 | 2 | |||||
16 | 10.00~16.00 | 12 | 3 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
FPDS GFPDS BFPDS SFPDS CFPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 2~4 | 3.0~10.0 | 0 | 0.1 |
3 | 1.50~3.00 | 3~6 | 3.0~10.0 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 4.0~10.0 | 0.5 | |||
5 | 2.00~5.00 | 5~10 | 4.0~10.0 | ||||||
6 | 2.00~6.00 | 6~12 | 4.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 6.0~15.0 | 1 | |||
10 | 3.00~10.00 | 10~20 | 6.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 6.0~20.0 | 1.5 | |||
13 | 6.00~13.00 | 13~26 | 6.0~20.0 | 2 | |||||
16 | 10.00~16.00 | 16~32 | 7.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 7.0~20.0 |