We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BFPDSC2-P[1.5-2/0.01]-L[2-4/1]-B[3-10/0.1]
Description
Small Flat Head/Standard/P Configurable
Stock availability:
On request
If you are seeking MISUMI BFPDSC2-P[1.5-2/0.01]-L[2-4/1]-B[3-10/0.1], communicate with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of outcomes and private attention to each customer. We cherish everyone, who worked with us - so, our regular purchasers receive the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Bahamas, Lebanon, Mexico, Austria, Indonesia, Samoa, Bulgaria, Kenya, Syria, Sudan, Singapore, Argentina, Jamaica, Liechtenstein, Switzerland, Suriname, Kazakhstan, Israel, Serbia, Peru, Monaco, Panama, Fiji, Philippines, Ukraine, Finland, Kyrgyzstan, Egypt, Tajikistan, Benin, Brunei, Iran, Malaysia, Estonia, Denmark, Poland, Seychelles. A well-shaped logistics connection and a partnership network let us to conduct our products anywhere in the world immediately without discrediting product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as stay in control.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | D Tolerance Code | ||
P Selectable | P Configurable | P, L, B Configurable | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDB | JPDS | FPDS | C (m6) PC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPDS | GFPDS | ||
EN 1.2510 Equiv. | - | - | - | - | BFPDS | ||
EN 1.4301 Equiv.* | - | - | SJPDB | SJPDS | SFPDS | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | HJPDS | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | - | CFPDS |
Part Number | - | P | - | L | - | B |
JPDSC4 FPDSC4 | - - | 2.55 P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | |||||||||||||
Type | D Tol. | D | D dim. Tolerance | ||||||||||||||
m6 | p6 | ||||||||||||||||
JPDB SJPDB | C (m6) PC (p6) | 3 | +0.008 +0.002 | +0.012 +0.006 | 2 | 5 | 3 | 1 | 0.1 | ||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 0.5 | ||||||||||||
5 | 2 | 3 | 4 | 8 | |||||||||||||
6 | 3 | 4 | 5 | 10 | 4 | ||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 4 | 5 | 6 | 12 | 2 | 1 | |||||||||
10 | 5 | 6 | 7 | 8 | 16 | 5 | |||||||||||
16 | +0.018 +0.007 | +0.029 +0.018 | 10 | 13 | 22 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
JPDS GJPDS SJPDS HJPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 4 | 3 | 0 | 0.1 |
3 | 1.50~3.00 | 5 | 1 | ||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 0.5 | |||||
5 | 2.00~5.00 | 8 | |||||||
6 | 2.00~6.00 | 10 | 4 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 12 | 2 | 1 | |||
10 | 3.00~10.00 | 16 | 5 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 20 | 6 | 1.5 | |||
13 | 6.00~13.00 | 22 | 10 | 2 | |||||
16 | 10.00~16.00 | 12 | 3 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
FPDS GFPDS BFPDS SFPDS CFPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 2~4 | 3.0~10.0 | 0 | 0.1 |
3 | 1.50~3.00 | 3~6 | 3.0~10.0 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 4.0~10.0 | 0.5 | |||
5 | 2.00~5.00 | 5~10 | 4.0~10.0 | ||||||
6 | 2.00~6.00 | 6~12 | 4.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 6.0~15.0 | 1 | |||
10 | 3.00~10.00 | 10~20 | 6.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 6.0~20.0 | 1.5 | |||
13 | 6.00~13.00 | 13~26 | 6.0~20.0 | 2 | |||||
16 | 10.00~16.00 | 16~32 | 7.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 7.0~20.0 |