We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPFNB8-9
Description
Large Flat Head/Threaded/P Configurable
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting MISUMI CJPFNB8-9, call FAMAGA, the world's primary vendor of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of products and particular attention to each orderer. We appreciate everyone, who cooperated with us - therefore, our regular customers pick up the most desirable purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, El Salvador, Latvia, Yemen, Greece, Russia, Estonia, South Sudan, Mongolia, Georgia, Botswana, Moldova, Malaysia, Albania, The Bahamas, Jordan, Singapore, Thailand, Zimbabwe, Laos, Bolivia, Mauritania, Uzbekistan, Vietnam, Mozambique, Montenegro, Nicaragua, Pakistan, Benin, Madagascar, Angola, Tunisia, Philippines, United Arab Emirates, Brazil, Nepal, East Timor, Equatorial Guinea, Sweden, Mexico, Luxembourg, Suriname, Switzerland, The Gambia, Burkina Faso, Swaziland, Libya, Qatar, Tanzania. A well-shaped logistics system and a partnership network let us to deliver our goods anywhere in the globe with no delay without damaging product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this bulk is ascending every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, get in touch with us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Material No. | Material | Surface Treatment | Hardness | Type | |||
| P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPFNB | JPFNA | FPFNA | FPFNLA | |
| EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPFNA | GFPFNA | GFPFNLA | |
| EN 1.2510 Equiv. | - | - | - | BJPFNA | BFPFNA | - | |
| EN 1.4301 Equiv.* | - | - | SJPFNB | SJPFNA | SFPFNA | SFPFNLA | |
| EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPFNB | - | CFPFNA | CFPFNLA |
| Part Number | - | P | - | L | - | B | - | ML |
| JPFNA3 FPFNA5 FPFNLA8 | - - - | 5.20 P7.80 P10.00 | - - | L8 L5 | - - | B4.0 B5.0 | - | ML8 |
| P | h6 |
| 3.50~6.00 | 0 -0.008 |
| 6.01~10.00 | 0 -0.009 |
| 10.01~18.00 | 0 -0.011 |
| 18.01~30.00 | 0 -0.013 |
| Part Number | P Selection | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | |||||||||
| Type | D | D dim. Tolerance g6 | ||||||||||||||
| JPFNB SJPFNB CJPFNB | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 3 | 0.5 | M3 | 147 | 4.5 | |||||
| 4 | -0.004 -0.012 | 5 | 6 | 8 | 4 | 1 | M4 | 333 | 6 | |||||||
| 5 | 6 | 8 | 9 | 3 | M5 | 676 | 7.5 | |||||||||
| 6 | 8 | 9 | 10 | 5 | M6 | 1156 | 9 | |||||||||
| 8 | -0.005 -0.014 | 9 | 10 | 12 | 13 | 5 | 6 | 1.5 | M8 | 2803 | 12 |
| Part Number | P 0.01mm Increment | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
| Type | D | D dim. Tolerance g6 | |||||||
| JPFNA GJPFNA BJPFNA SJPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 3 | 0.5 | M3 | 147 | 4.5 |
| 4 | -0.004 -0.012 | 4.50~7.00 | 4 | 1 | M4 | 333 | 6 | ||
| 5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | ||||
| 6 | 6.50~10.00 | 5 | M6 | 1156 | 9 | ||||
| 8 | -0.005 -0.014 | 9.00~13.00 | 5 | 6 | 1.5 | M8 | 2803 | 12 | |
| 10 | 11.00~15.00 | 10 | 2 | M10 | 5557 | 15 | |||
| 12 | -0.006 -0.017 | 13.00~16.00 | 8 | 20 | M12 | 9702 | 18 | ||
| 16 | 17.00~25.00 | 25 | 3 | M16 | 24108 | 24 | |||
| 20 | -0.007 -0.020 | 22.00~30.00 | 10 | 30 | M20 | 46942 | 30 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
| Type | D | D dim. Tolerance g6 | |||||||
| FPFNA GFPFNA BFPFNA SFPFNA CFPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 0.5 | M3 | 147 | 4.5 |
| 4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 1 | M4 | 333 | 6 | |
| 5 | 5.50~8.00 | 3~10 | 4.0~10.0 | M5 | 676 | 7.5 | |||
| 6 | 6.50~10.00 | 3~10 | 4.0~12.0 | M6 | 1156 | 9 | |||
| 8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 1.5 | M8 | 2803 | 12 | |
| 10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 2 | M10 | 5557 | 15 | ||
| 12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | M12 | 9702 | 18 | ||
| 16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 3 | M16 | 24108 | 24 | ||
| 20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | M20 | 46942 | 30 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ||
| Type | D | D dim. Tolerance g6 | |||||||
| FPFNLA GFPFNLA SFPFNLA CFPFNLA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 3~9 | 0.5 | M3 | 147 |
| 4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 4~12 | 1 | M4 | 333 | |
| 5 | 5.50~8.00 | 3~10 | 4.0~10.0 | 5~15 | M5 | 676 | |||
| 6 | 6.50~10.00 | 3~10 | 4.0~12.0 | 6~18 | M6 | 1156 | |||
| 8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 8~24 | 1.5 | M8 | 2803 | |
| 10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 10~30 | 2 | M10 | 5557 | ||
| 12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | 12~30 | M12 | 9702 | ||
| 16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 16~40 | 3 | M16 | 24108 | ||
| 20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | 20~40 | M20 | 46942 |
