We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI CJPFNB8-12, make contact with FAMAGA, the world's main supplier of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of merchandises and special attention to each consumer. We admire everyone, who worked with us - therefore, our regular purchasers obtain the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Angola, Madagascar, Swaziland, Mali, El Salvador, Luxembourg, Russia, Laos, Jamaica, Benin, Brazil, Qatar, Finland, Guyana, Antigua and Barbuda, Romania, Iran, Tajikistan, Zambia, Togo, Belarus, Turkmenistan, Switzerland, Seychelles, Bulgaria, Fiji, Botswana, United States, Indonesia, The Gambia, Cameroon, Croatia, Vietnam, Niger, Morocco, Mauritius, Algeria, Dominica, Afghanistan, Serbia, Sweden, Bolivia, Georgia, South Korea, Kuwait, Paraguay, Cyprus, Norway. A advanced logistics bond and a partnership network allow us to dispatch our items anywhere in the earth with no delay without compromising product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or book, contact us or write a message to the online chat on our site. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | |||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPFNB | JPFNA | FPFNA | FPFNLA | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPFNA | GFPFNA | GFPFNLA | |
EN 1.2510 Equiv. | - | - | - | BJPFNA | BFPFNA | - | |
EN 1.4301 Equiv.* | - | - | SJPFNB | SJPFNA | SFPFNA | SFPFNLA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPFNB | - | CFPFNA | CFPFNLA |
Part Number | - | P | - | L | - | B | - | ML |
JPFNA3 FPFNA5 FPFNLA8 | - - - | 5.20 P7.80 P10.00 | - - | L8 L5 | - - | B4.0 B5.0 | - | ML8 |
P | h6 |
3.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | |||||||||
Type | D | D dim. Tolerance g6 | ||||||||||||||
JPFNB SJPFNB CJPFNB | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 3 | 0.5 | M3 | 147 | 4.5 | |||||
4 | -0.004 -0.012 | 5 | 6 | 8 | 4 | 1 | M4 | 333 | 6 | |||||||
5 | 6 | 8 | 9 | 3 | M5 | 676 | 7.5 | |||||||||
6 | 8 | 9 | 10 | 5 | M6 | 1156 | 9 | |||||||||
8 | -0.005 -0.014 | 9 | 10 | 12 | 13 | 5 | 6 | 1.5 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
JPFNA GJPFNA BJPFNA SJPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 3 | 0.5 | M3 | 147 | 4.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 4 | 1 | M4 | 333 | 6 | ||
5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | ||||
6 | 6.50~10.00 | 5 | M6 | 1156 | 9 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | 6 | 1.5 | M8 | 2803 | 12 | |
10 | 11.00~15.00 | 10 | 2 | M10 | 5557 | 15 | |||
12 | -0.006 -0.017 | 13.00~16.00 | 8 | 20 | M12 | 9702 | 18 | ||
16 | 17.00~25.00 | 25 | 3 | M16 | 24108 | 24 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 30 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNA GFPFNA BFPFNA SFPFNA CFPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 0.5 | M3 | 147 | 4.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 1 | M4 | 333 | 6 | |
5 | 5.50~8.00 | 3~10 | 4.0~10.0 | M5 | 676 | 7.5 | |||
6 | 6.50~10.00 | 3~10 | 4.0~12.0 | M6 | 1156 | 9 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 1.5 | M8 | 2803 | 12 | |
10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 2 | M10 | 5557 | 15 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | M12 | 9702 | 18 | ||
16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 3 | M16 | 24108 | 24 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNLA GFPFNLA SFPFNLA CFPFNLA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 3~9 | 0.5 | M3 | 147 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 4~12 | 1 | M4 | 333 | |
5 | 5.50~8.00 | 3~10 | 4.0~10.0 | 5~15 | M5 | 676 | |||
6 | 6.50~10.00 | 3~10 | 4.0~12.0 | 6~18 | M6 | 1156 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 8~24 | 1.5 | M8 | 2803 | |
10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 10~30 | 2 | M10 | 5557 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | 12~30 | M12 | 9702 | ||
16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 16~40 | 3 | M16 | 24108 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | 20~40 | M20 | 46942 |