We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI CJPFNB5-8, contact FAMAGA, the world's dominant provider of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and private attention to each user. We appreciate everyone, who liased with us - therefore, our regular clients accept the most desirable purchase forms and discounts on the factory-made equipment market. Today, there are more than 4 thousand such purchasers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the earth Germany, United Kingdom, Jamaica, Yemen, Morocco, Moldova, Georgia, Albania, The Gambia, Greece, Malaysia, Guatemala, Chile, United Arab Emirates, Botswana, South Sudan, Malta, Japan, Uruguay, Honduras, Mali, Cape Verde, Poland, Ecuador, Djibouti, Afghanistan, Thailand, El Salvador, Ireland, Egypt, Swaziland, Philippines, Tonga, Cyprus, Togo, Hungary, Dominica, Zimbabwe, Bosnia and Herzegovina, Mauritius, Indonesia, Finland, East Timor, China, Croatia, Seychelles, Suriname, Ghana, Vietnam, Macedonia. A well-built logistics link and a partnership network guide us to conduct our products anywhere in the globe promptly without disreputing product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | |||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPFNB | JPFNA | FPFNA | FPFNLA | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPFNA | GFPFNA | GFPFNLA | |
EN 1.2510 Equiv. | - | - | - | BJPFNA | BFPFNA | - | |
EN 1.4301 Equiv.* | - | - | SJPFNB | SJPFNA | SFPFNA | SFPFNLA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPFNB | - | CFPFNA | CFPFNLA |
Part Number | - | P | - | L | - | B | - | ML |
JPFNA3 FPFNA5 FPFNLA8 | - - - | 5.20 P7.80 P10.00 | - - | L8 L5 | - - | B4.0 B5.0 | - | ML8 |
P | h6 |
3.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | |||||||||
Type | D | D dim. Tolerance g6 | ||||||||||||||
JPFNB SJPFNB CJPFNB | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 3 | 0.5 | M3 | 147 | 4.5 | |||||
4 | -0.004 -0.012 | 5 | 6 | 8 | 4 | 1 | M4 | 333 | 6 | |||||||
5 | 6 | 8 | 9 | 3 | M5 | 676 | 7.5 | |||||||||
6 | 8 | 9 | 10 | 5 | M6 | 1156 | 9 | |||||||||
8 | -0.005 -0.014 | 9 | 10 | 12 | 13 | 5 | 6 | 1.5 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
JPFNA GJPFNA BJPFNA SJPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 3 | 0.5 | M3 | 147 | 4.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 4 | 1 | M4 | 333 | 6 | ||
5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | ||||
6 | 6.50~10.00 | 5 | M6 | 1156 | 9 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | 6 | 1.5 | M8 | 2803 | 12 | |
10 | 11.00~15.00 | 10 | 2 | M10 | 5557 | 15 | |||
12 | -0.006 -0.017 | 13.00~16.00 | 8 | 20 | M12 | 9702 | 18 | ||
16 | 17.00~25.00 | 25 | 3 | M16 | 24108 | 24 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 30 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNA GFPFNA BFPFNA SFPFNA CFPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 0.5 | M3 | 147 | 4.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 1 | M4 | 333 | 6 | |
5 | 5.50~8.00 | 3~10 | 4.0~10.0 | M5 | 676 | 7.5 | |||
6 | 6.50~10.00 | 3~10 | 4.0~12.0 | M6 | 1156 | 9 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 1.5 | M8 | 2803 | 12 | |
10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 2 | M10 | 5557 | 15 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | M12 | 9702 | 18 | ||
16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 3 | M16 | 24108 | 24 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNLA GFPFNLA SFPFNLA CFPFNLA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 3~9 | 0.5 | M3 | 147 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 4~12 | 1 | M4 | 333 | |
5 | 5.50~8.00 | 3~10 | 4.0~10.0 | 5~15 | M5 | 676 | |||
6 | 6.50~10.00 | 3~10 | 4.0~12.0 | 6~18 | M6 | 1156 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 8~24 | 1.5 | M8 | 2803 | |
10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 10~30 | 2 | M10 | 5557 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | 12~30 | M12 | 9702 | ||
16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 16~40 | 3 | M16 | 24108 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | 20~40 | M20 | 46942 |