We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPFNA5-[5.5-8/0.01]
Description
Large Flat Head/Threaded/P Configurable
Stock availability:
On request
If you are seeking MISUMI CJPFNA5-[5.5-8/0.01], communicate with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and private attention to each consumer. We value everyone, who conspired with us - therefore, our regular consumers pick up the most beneficial purchase conditions and discounts on the industrial equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Cyprus, Suriname, East Timor, Hungary, Qatar, Benin, Malaysia, Brazil, Vietnam, South Korea, Czech Republic, Djibouti, Egypt, Georgia, Eswatini, Equatorial Guinea, Eritrea, Niger, Albania, Afghanistan, Tunisia, Serbia, Yemen, Central African Republic, Philippines, Burkina Faso, Poland, Sweden, Panama, Norway, Bolivia, Luxembourg, Libya, Haiti, Russia, Angola, Fiji, Nepal, United States, Tajikistan, Peru, United Arab Emirates, Madagascar, Mauritius, Thailand, China, Iceland. A well-developed logistics bond and a partnership network cheer us to conduct our items anywhere in the earth with no delay without damaging product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this amount is rising every day. We are happy that users choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | |||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPFNB | JPFNA | FPFNA | FPFNLA | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPFNA | GFPFNA | GFPFNLA | |
EN 1.2510 Equiv. | - | - | - | BJPFNA | BFPFNA | - | |
EN 1.4301 Equiv.* | - | - | SJPFNB | SJPFNA | SFPFNA | SFPFNLA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPFNB | - | CFPFNA | CFPFNLA |
Part Number | - | P | - | L | - | B | - | ML |
JPFNA3 FPFNA5 FPFNLA8 | - - - | 5.20 P7.80 P10.00 | - - | L8 L5 | - - | B4.0 B5.0 | - | ML8 |
P | h6 |
3.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | |||||||||
Type | D | D dim. Tolerance g6 | ||||||||||||||
JPFNB SJPFNB CJPFNB | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 3 | 0.5 | M3 | 147 | 4.5 | |||||
4 | -0.004 -0.012 | 5 | 6 | 8 | 4 | 1 | M4 | 333 | 6 | |||||||
5 | 6 | 8 | 9 | 3 | M5 | 676 | 7.5 | |||||||||
6 | 8 | 9 | 10 | 5 | M6 | 1156 | 9 | |||||||||
8 | -0.005 -0.014 | 9 | 10 | 12 | 13 | 5 | 6 | 1.5 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
JPFNA GJPFNA BJPFNA SJPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 3 | 0.5 | M3 | 147 | 4.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 4 | 1 | M4 | 333 | 6 | ||
5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | ||||
6 | 6.50~10.00 | 5 | M6 | 1156 | 9 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | 6 | 1.5 | M8 | 2803 | 12 | |
10 | 11.00~15.00 | 10 | 2 | M10 | 5557 | 15 | |||
12 | -0.006 -0.017 | 13.00~16.00 | 8 | 20 | M12 | 9702 | 18 | ||
16 | 17.00~25.00 | 25 | 3 | M16 | 24108 | 24 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 30 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNA GFPFNA BFPFNA SFPFNA CFPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 0.5 | M3 | 147 | 4.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 1 | M4 | 333 | 6 | |
5 | 5.50~8.00 | 3~10 | 4.0~10.0 | M5 | 676 | 7.5 | |||
6 | 6.50~10.00 | 3~10 | 4.0~12.0 | M6 | 1156 | 9 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 1.5 | M8 | 2803 | 12 | |
10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 2 | M10 | 5557 | 15 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | M12 | 9702 | 18 | ||
16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 3 | M16 | 24108 | 24 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNLA GFPFNLA SFPFNLA CFPFNLA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 3~9 | 0.5 | M3 | 147 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 4~12 | 1 | M4 | 333 | |
5 | 5.50~8.00 | 3~10 | 4.0~10.0 | 5~15 | M5 | 676 | |||
6 | 6.50~10.00 | 3~10 | 4.0~12.0 | 6~18 | M6 | 1156 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 8~24 | 1.5 | M8 | 2803 | |
10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 10~30 | 2 | M10 | 5557 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | 12~30 | M12 | 9702 | ||
16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 16~40 | 3 | M16 | 24108 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | 20~40 | M20 | 46942 |