We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BFPFNA3-P[3.5-6/0.01]-L[2-6/1]-B[3-10/0.1]
Description
Large Flat Head/Threaded/P Configurable
Stock availability:
On request
If you are pursuing MISUMI BFPFNA3-P[3.5-6/0.01]-L[2-6/1]-B[3-10/0.1], reach FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of items and special attention to each purchaser. We admire everyone, who cooperated with us - so, our regular consumers bring in the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Benin, Papua New Guinea, Guinea, Central African Republic, Botswana, Yemen, Pakistan, Iran, Guatemala, Syria, Equatorial Guinea, Burkina Faso, Morocco, Peru, Moldova, Oman, Fiji, Cyprus, Australia, Afghanistan, Tajikistan, Laos, Comoros, Netherlands, Finland, The Bahamas, Dominica, East Timor, El Salvador, United States, South Sudan, Niger, Mauritania, Seychelles, Algeria, The Gambia, Tanzania, Cape Verde, Luxembourg, Djibouti, Cameroon, Swaziland, Kiribati, Mexico, Ireland, Jordan, Togo, Malaysia, South Korea, Libya. A well-built logistics chains and a partnership network allow us to ship our goods anywhere in the world quickly without compromising product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are proud that clients choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or make a request, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | |||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPFNB | JPFNA | FPFNA | FPFNLA | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPFNA | GFPFNA | GFPFNLA | |
EN 1.2510 Equiv. | - | - | - | BJPFNA | BFPFNA | - | |
EN 1.4301 Equiv.* | - | - | SJPFNB | SJPFNA | SFPFNA | SFPFNLA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPFNB | - | CFPFNA | CFPFNLA |
Part Number | - | P | - | L | - | B | - | ML |
JPFNA3 FPFNA5 FPFNLA8 | - - - | 5.20 P7.80 P10.00 | - - | L8 L5 | - - | B4.0 B5.0 | - | ML8 |
P | h6 |
3.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | |||||||||
Type | D | D dim. Tolerance g6 | ||||||||||||||
JPFNB SJPFNB CJPFNB | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 3 | 0.5 | M3 | 147 | 4.5 | |||||
4 | -0.004 -0.012 | 5 | 6 | 8 | 4 | 1 | M4 | 333 | 6 | |||||||
5 | 6 | 8 | 9 | 3 | M5 | 676 | 7.5 | |||||||||
6 | 8 | 9 | 10 | 5 | M6 | 1156 | 9 | |||||||||
8 | -0.005 -0.014 | 9 | 10 | 12 | 13 | 5 | 6 | 1.5 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
JPFNA GJPFNA BJPFNA SJPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 3 | 0.5 | M3 | 147 | 4.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 4 | 1 | M4 | 333 | 6 | ||
5 | 5.50~8.00 | 3 | M5 | 676 | 7.5 | ||||
6 | 6.50~10.00 | 5 | M6 | 1156 | 9 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | 6 | 1.5 | M8 | 2803 | 12 | |
10 | 11.00~15.00 | 10 | 2 | M10 | 5557 | 15 | |||
12 | -0.006 -0.017 | 13.00~16.00 | 8 | 20 | M12 | 9702 | 18 | ||
16 | 17.00~25.00 | 25 | 3 | M16 | 24108 | 24 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 30 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNA GFPFNA BFPFNA SFPFNA CFPFNA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 0.5 | M3 | 147 | 4.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 1 | M4 | 333 | 6 | |
5 | 5.50~8.00 | 3~10 | 4.0~10.0 | M5 | 676 | 7.5 | |||
6 | 6.50~10.00 | 3~10 | 4.0~12.0 | M6 | 1156 | 9 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 1.5 | M8 | 2803 | 12 | |
10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 2 | M10 | 5557 | 15 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | M12 | 9702 | 18 | ||
16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 3 | M16 | 24108 | 24 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNLA GFPFNLA SFPFNLA CFPFNLA | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 3.0~10.0 | 3~9 | 0.5 | M3 | 147 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 4.0~10.0 | 4~12 | 1 | M4 | 333 | |
5 | 5.50~8.00 | 3~10 | 4.0~10.0 | 5~15 | M5 | 676 | |||
6 | 6.50~10.00 | 3~10 | 4.0~12.0 | 6~18 | M6 | 1156 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 5.0~15.0 | 8~24 | 1.5 | M8 | 2803 | |
10 | 11.00~15.00 | 5~15 | 6.0~20.0 | 10~30 | 2 | M10 | 5557 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 6.0~20.0 | 12~30 | M12 | 9702 | ||
16 | 17.00~25.00 | 8~20 | 7.0~20.0 | 16~40 | 3 | M16 | 24108 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | 20~40 | M20 | 46942 |