We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI JPDTA10-14, contact FAMAGA, the world's chief producer of manufacturing equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of products and personalseparate attention to each customer. We respect everyone, who conspired with us - therefore, our regular buyers accept the most favorable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Seychelles, Monaco, Azerbaijan, Sri Lanka, Mozambique, Costa Rica, Poland, Sierra Leone, Afghanistan, Myanmar, Honduras, Brunei, Congo, Mauritania, Paraguay, South Sudan, Qatar, Luxembourg, Bosnia and Herzegovina, Sweden, Chile, Morocco, Burkina Faso, Philippines, Japan, Uzbekistan, United Arab Emirates, Comoros, Cyprus, Kazakhstan, Madagascar, Nepal, The Gambia, Switzerland, Laos, United States, Guatemala, Botswana, Macedonia, Haiti, Namibia, Suriname, Mexico, Norway, Pakistan, Cape Verde, Yemen, Australia. A well-built logistics link and a partnership network let us to conduct our units anywhere in the planet quickly without discrediting product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are happy that users choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write a message to the online chat on our site. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | 6 | -0.004 -0.012 | 8, 10 | 10 | 5 | M3 | 147 | 5 | 1 |
8 | -0.005 -0.014 | 12 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 8 | 4 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 10 | 5 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
8T | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | 676 | 8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | 1.5 | |
8T | 6~16 | M4 | 333 | 6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | 676 | 8 | 2 | ||
10T | 6~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | 676 | 8 | ||
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | 8~20 | M6 | 1156 | 9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |