We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GJPDTC10-[11-15/0.01]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are looking for MISUMI GJPDTC10-[11-15/0.01], call FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and special attention to each buyer. We respect everyone, who conspired with us - hence, our regular buyers bring in the most acceptable purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4000 such clients, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Montenegro, Ecuador, Georgia, Palestine, Ghana, Sri Lanka, Kazakhstan, France, Turkey, Oman, Saudi Arabia, New Zealand, Honduras, Czech Republic, Brunei, Tunisia, Kenya, Greece, Grenada, Algeria, Seychelles, Sudan, Paraguay, Eswatini, Azerbaijan, El Salvador, Kiribati, Bulgaria, Ukraine, The Bahamas, Swaziland, Iran, Bangladesh, Liechtenstein, Tonga, Armenia, Benin, Hungary, Rwanda, Slovakia, Serbia, Burundi, Mauritania, Equatorial Guinea, Senegal, Cape Verde, Niger, Zambia, Uruguay, East Timor. A advanced logistics connection and a partnership network help us to dispatch our elements anywhere in the earth with no delay without discrediting product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or book, phone us or send a message to the online chat on our site. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | 6 | -0.004 -0.012 | 8, 10 | 10 | 5 | M3 | 147 | 5 | 1 |
8 | -0.005 -0.014 | 12 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 8 | 4 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 10 | 5 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
8T | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | 676 | 8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | 1.5 | |
8T | 6~16 | M4 | 333 | 6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | 676 | 8 | 2 | ||
10T | 6~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | 676 | 8 | ||
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | 8~20 | M6 | 1156 | 9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |