We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPDTC13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are pursuing MISUMI GFPDTC13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each buyer. We value everyone, who liased with us - so, our regular consumers procure the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Sweden, Malaysia, Tanzania, Sri Lanka, Netherlands, Suriname, Burma, Morocco, East Timor, Russia, Zimbabwe, Gambia, Yemen, Uganda, Vietnam, Peru, Belarus, Fiji, Turkey, Romania, Kuwait, Estonia, Croatia, Andorra, Samoa, Dominica, Albania, Antigua and Barbuda, Sudan, Costa Rica, Turkmenistan, Djibouti, Botswana, Rwanda, Latvia, Indonesia, Mexico, Moldova, Cyprus, Austria, Tunisia, Syria, Mali, Comoros, Egypt, Tajikistan, Philippines. A well-built logistics network and a partnership network let us to ship our products anywhere in the world immediately without compromising product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that customers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To request or book, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | 6 | -0.004 -0.012 | 8, 10 | 10 | 5 | M3 | 147 | 5 | 1 |
8 | -0.005 -0.014 | 12 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 8 | 4 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 10 | 5 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
8T | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | 676 | 8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | 1.5 | |
8T | 6~16 | M4 | 333 | 6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | 676 | 8 | 2 | ||
10T | 6~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | 676 | 8 | ||
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | 8~20 | M6 | 1156 | 9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |