We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPDTC6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are inspecting MISUMI FPDTC6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1], catch up with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of merchandises and individual attention to each customer. We praise everyone, who worked with us - hence, our regular consumers pick up the most favorable purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such clients, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, South Africa, Equatorial Guinea, Tanzania, Djibouti, Sudan, Eritrea, Bangladesh, Sierra Leone, Tunisia, Myanmar, South Sudan, New Zealand, Haiti, Kiribati, Mali, Czech Republic, Jordan, Suriname, Central African Republic, Zambia, Eswatini, Switzerland, Moldova, Algeria, Namibia, Malaysia, Turkmenistan, Tajikistan, Gambia, El Salvador, Iceland, Niger, Mexico, Turkey, Iran, Bulgaria, Belarus, Kenya, Brunei, Antigua and Barbuda, Qatar, Iraq, Guatemala, Montenegro, Rwanda, Malta, Denmark. A well-built logistics network and a partnership network assist us to dispatch our units anywhere in the planet with no delay without disreputing product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All merchandises from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, contact us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | 6 | -0.004 -0.012 | 8, 10 | 10 | 5 | M3 | 147 | 5 | 1 |
8 | -0.005 -0.014 | 12 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 8 | 4 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 10 | 5 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
8T | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | 676 | 8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | 1.5 | |
8T | 6~16 | M4 | 333 | 6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | 676 | 8 | 2 | ||
10T | 6~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | 676 | 8 | ||
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | 8~20 | M6 | 1156 | 9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |