We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPDSTC6-[4-6/0.01]
Description
Small Flat Head/Tapped/P Configurable
Stock availability:
On request
If you are looking for MISUMI JPDSTC6-[4-6/0.01], call FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of merchandises and personalseparate attention to each orderer. We respect everyone, who joined with us - hence, our regular customers pick up the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Honduras, Argentina, Mauritania, Malaysia, Iceland, Togo, Guinea, Uzbekistan, Chile, Palestine, Ghana, Bangladesh, Armenia, Liberia, Liechtenstein, Paraguay, Namibia, Ireland, Senegal, Jamaica, Montenegro, Finland, Norway, Andorra, Eswatini, China, Kyrgyzstan, Thailand, Costa Rica, Ecuador, Angola, Azerbaijan, Morocco, Brazil, Belize, Nigeria, Samoa, Ukraine, Swaziland, Bosnia and Herzegovina, Central African Republic, Laos, Mali. A advanced logistics bond and a partnership network assist us to conduct our products anywhere in the world on-time without disreputing product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or order, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | C | |||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | 6 | -0.004 -0.012 | 4 | 10 | 3 | M3 | 147 | 5 | 0.5 | ||||
8 | -0.005 -0.014 | 6 | 12 | 4 | M4 | 333 | 6 | 1 | |||||
10 | 8 | 16 | 5 | M5 | 676 | 8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | 6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 10 | 3 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 12 | 4 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 16 | 5 | M5 | 676 | 8 | |||
12 | -0.006 -0.017 | 7.00~12.00 | 20 | 6 | 1.5 | ||||
13 | 8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 8~12 | 2.0~12.0 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 11~20 | 3.0~20.0 | M5 | 676 | 8 | |||
10T | 8~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 1.5 | |
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | 9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |