We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing MISUMI JPDSTB6-4, connect FAMAGA, the world's central company of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of products and individual attention to each purchaser. We appreciate everyone, who collaborated with us - therefore, our regular clients pick up the most helpful purchase forms and discounts on the factory-made equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Grenada, Egypt, Rwanda, Eswatini, Finland, Armenia, Eritrea, South Sudan, Poland, Canada, Yemen, Haiti, Peru, Nicaragua, El Salvador, Madagascar, Guatemala, Chile, Nepal, Tonga, Swaziland, Namibia, Djibouti, Vietnam, Bolivia, Iceland, Mexico, Suriname, Bosnia and Herzegovina, The Gambia, Cameroon, Angola, Uganda, Belarus, Georgia, Albania, Argentina, Cape Verde, New Zealand, Jamaica, Mauritius, Pakistan, Ireland. A advanced logistics chains and a partnership network guide us to conduct our units anywhere in the earth promptly without discrediting product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All spare parts from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | C | |||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | 6 | -0.004 -0.012 | 4 | 10 | 3 | M3 | 147 | 5 | 0.5 | ||||
8 | -0.005 -0.014 | 6 | 12 | 4 | M4 | 333 | 6 | 1 | |||||
10 | 8 | 16 | 5 | M5 | 676 | 8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | 6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 10 | 3 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 12 | 4 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 16 | 5 | M5 | 676 | 8 | |||
12 | -0.006 -0.017 | 7.00~12.00 | 20 | 6 | 1.5 | ||||
13 | 8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 8~12 | 2.0~12.0 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 11~20 | 3.0~20.0 | M5 | 676 | 8 | |||
10T | 8~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 1.5 | |
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | 9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |