We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI JPDSTB12-10, reach FAMAGA, the world's top supplier of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each orderer. We respect everyone, who conspired with us - therefore, our regular customers accept the most desirable purchase forms and discounts on the manufacturing equipment market. At present, there are more than 3500 such consumers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Eritrea, Chile, Mozambique, Vietnam, Greece, Luxembourg, Chad, Belize, Czech Republic, Bhutan, Thailand, Sierra Leone, Zambia, Azerbaijan, Jordan, Bulgaria, Slovakia, Burkina Faso, New Zealand, Cyprus, Iran, United States, India, Kenya, Macedonia, Peru, Kazakhstan, Central African Republic, Liechtenstein, Tunisia, Croatia, Antigua and Barbuda, East Timor, Israel, Cameroon, Lithuania, Ireland, Nigeria, Sweden, Malta, Algeria, Namibia, Niger. A well-shaped logistics series and a partnership network allow us to send our items anywhere in the globe promptly without disreputing product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | C | |||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | 6 | -0.004 -0.012 | 4 | 10 | 3 | M3 | 147 | 5 | 0.5 | ||||
8 | -0.005 -0.014 | 6 | 12 | 4 | M4 | 333 | 6 | 1 | |||||
10 | 8 | 16 | 5 | M5 | 676 | 8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | 6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 10 | 3 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 12 | 4 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 16 | 5 | M5 | 676 | 8 | |||
12 | -0.006 -0.017 | 7.00~12.00 | 20 | 6 | 1.5 | ||||
13 | 8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 8~12 | 2.0~12.0 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 11~20 | 3.0~20.0 | M5 | 676 | 8 | |||
10T | 8~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 1.5 | |
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | 9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |