We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPDSTC8-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]
Description
Small Flat Head/Tapped/P Configurable
Stock availability:
On request
If you are looking for MISUMI FPDSTC8-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of products and personalseparate attention to each user. We praise everyone, who collaborated with us - so, our regular buyers pick up the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Azerbaijan, Mexico, Bulgaria, Nigeria, Mauritania, Namibia, Malaysia, Brunei, Guyana, East Timor, Romania, Guatemala, Philippines, Singapore, Cyprus, Sweden, Comoros, Kazakhstan, Haiti, Kiribati, Mauritius, Rwanda, Samoa, Serbia, Albania, Moldova, Nepal, Tajikistan, Jamaica, United Arab Emirates, Kenya, Panama, Russia, Latvia, Vietnam, Egypt, Kyrgyzstan, Botswana, Sierra Leone, Switzerland, Malta, Burkina Faso, Seychelles. A well-elaborated logistics chains and a partnership network assist us to conduct our units anywhere in the earth with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this number is amounting every day. We are happy that customers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | C | |||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | 6 | -0.004 -0.012 | 4 | 10 | 3 | M3 | 147 | 5 | 0.5 | ||||
8 | -0.005 -0.014 | 6 | 12 | 4 | M4 | 333 | 6 | 1 | |||||
10 | 8 | 16 | 5 | M5 | 676 | 8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | 6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 10 | 3 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 12 | 4 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 16 | 5 | M5 | 676 | 8 | |||
12 | -0.006 -0.017 | 7.00~12.00 | 20 | 6 | 1.5 | ||||
13 | 8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 8~12 | 2.0~12.0 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 11~20 | 3.0~20.0 | M5 | 676 | 8 | |||
10T | 8~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 1.5 | |
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | 9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |