We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPDSTC6T-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]
Description
Small Flat Head/Tapped/P Configurable
Stock availability:
On request
If you are inspecting MISUMI FPDSTC6T-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1], catch up with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of merchandises and individual attention to each purchaser. We praise everyone, who cooperated with us - hence, our regular consumers accept the most favorable purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such clients, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, South Sudan, Austria, Brunei, Luxembourg, Chile, Benin, Tonga, Senegal, Turkmenistan, Sudan, Malawi, Niger, Malta, Grenada, Denmark, Central African Republic, Paraguay, Latvia, Iraq, China, Equatorial Guinea, Poland, Greece, Mongolia, Zambia, Ireland, Australia, Bosnia and Herzegovina, Cameroon, Tanzania, Bolivia, Eswatini, Belize, Ghana, Norway, Slovakia, Mozambique, Namibia, Tajikistan, Kenya, Croatia, Israel, Libya. A well-built logistics network and a partnership network help us to dispatch our goods anywhere in the planet immediately without disreputing product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | C | |||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | 6 | -0.004 -0.012 | 4 | 10 | 3 | M3 | 147 | 5 | 0.5 | ||||
8 | -0.005 -0.014 | 6 | 12 | 4 | M4 | 333 | 6 | 1 | |||||
10 | 8 | 16 | 5 | M5 | 676 | 8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | 6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 10 | 3 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 12 | 4 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 16 | 5 | M5 | 676 | 8 | |||
12 | -0.006 -0.017 | 7.00~12.00 | 20 | 6 | 1.5 | ||||
13 | 8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 8~12 | 2.0~12.0 | M3 | 147 | 5 | 0.5 |
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | 333 | 6 | 1 | |
10 | 7.00~10.00 | 11~20 | 3.0~20.0 | M5 | 676 | 8 | |||
10T | 8~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 1.5 | |
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | 9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |