We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPDAJB8-P[9-15/0.01]-B[3.5-15/0.1]-G[1-15/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are pursuing MISUMI LPDAJB8-P[9-15/0.01]-B[3.5-15/0.1]-G[1-15/1]-L[0-10/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and private attention to each consumer. We praise everyone, who cooperated with us - so, our regular customers procure the most attractive purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Swaziland, Bolivia, Georgia, Finland, Jamaica, Paraguay, Estonia, Qatar, Kiribati, Sudan, Singapore, Angola, Ghana, Samoa, Nigeria, Mozambique, Netherlands, Russia, Pakistan, Fiji, Costa Rica, Tajikistan, Mauritius, Brunei, Kazakhstan, Indonesia, Suriname, The Bahamas, Cape Verde, Seychelles, Greece, Libya, Zimbabwe, Tunisia, East Timor, Argentina, Latvia, South Korea, Croatia, United Arab Emirates. A well-built logistics system and a partnership network assist us to deliver our products anywhere in the planet immediately without disreputing product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are happy that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as stay in control.
To consult or make a request, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |