We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPDAJB3-P[4-8/0.01]-B[3.5-10/0.1]-G[1-6/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are inspecting MISUMI LPDAJB3-P[4-8/0.01]-B[3.5-10/0.1]-G[1-6/1]-L[0-10/1], reach FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are outlined in the quality of merchandises and individual attention to each buyer. We praise everyone, who engaged with us - so, our regular consumers obtain the most attractive purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such purchasers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the planet Germany, United Kingdom, Nepal, Djibouti, Philippines, Pakistan, Croatia, Kazakhstan, Serbia, Panama, Armenia, Bahamas, Algeria, Eritrea, Georgia, Bulgaria, Botswana, Mongolia, Comoros, Monaco, Angola, Benin, Zimbabwe, Saudi Arabia, Haiti, Swaziland, Montenegro, Yemen, Dominica, Nicaragua, Luxembourg, Mexico, Namibia, Austria, Russia, Malta, Costa Rica, Brazil, Indonesia, Mozambique, Qatar, Switzerland. A well-developed logistics series and a partnership network allow us to send our goods anywhere in the planet promptly without disreputing product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is ascending every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |