We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPDAC20-P[22-30/0.01]-B[5-20/0.1]-R[1-15/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are seeking MISUMI LPDAC20-P[22-30/0.01]-B[5-20/0.1]-R[1-15/1]-L[0-10/1], call FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are portrayed in the quality of spare parts and particular attention to each consumer. We understand everyone, who cooperated with us - hence, our regular buyers procure the most helpful purchase terms and discounts on the factory-made equipment market. Today, there are more than 4500 such purchasers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Liberia, South Sudan, Uruguay, Congo, Austria, Guinea-Bissau, Kazakhstan, Myanmar, Eritrea, Turkmenistan, Equatorial Guinea, Japan, Senegal, Syria, India, Mali, Libya, Tunisia, Liechtenstein, China, Guinea, Costa Rica, Moldova, Kyrgyzstan, Saudi Arabia, Zambia, Botswana, Georgia, Samoa, Tanzania, Peru, Sudan, Burundi, Andorra, Vietnam, Denmark, Belize, Ukraine, Israel, Afghanistan, Slovakia, Malta, Iceland, Bolivia, Montenegro, Iran. A advanced logistics chains and a partnership network cheer us to send our elements anywhere in the earth with no delay without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as to stay on the top.
To get some advice or book, call us by phone or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |