We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPARB3-P[4-8/0.01]-B[3.5-25/0.1]-G[1-6/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are questing MISUMI LPARB3-P[4-8/0.01]-B[3.5-25/0.1]-G[1-6/1]-L[0-10/1], communicate with FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are years of experience, which are symbolized in the quality of products and personalseparate attention to each orderer. We respect everyone, who conspired with us - so, our regular purchasers receive the most beneficial purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such clients, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the planet Germany, United Kingdom, Liberia, Poland, Kazakhstan, Iceland, Angola, Comoros, Estonia, Rwanda, Bahamas, Chad, Philippines, Swaziland, Mexico, Bosnia and Herzegovina, Guatemala, Pakistan, United Arab Emirates, Tonga, Burkina Faso, North Korea, Guyana, Turkey, Cape Verde, Russia, East Timor, South Sudan, Cyprus, Mongolia, Belarus, Indonesia, Sweden, Sudan, Dominica, Madagascar, Samoa, Haiti, China, Finland, Togo, Nepal, Jamaica, Algeria, United States, Hungary. A well-elaborated logistics bond and a partnership network allow us to dispatch our goods anywhere in the planet promptly without damaging product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more developed and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |