We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPAJB8-P[9-15/0.01]-B[5-40/0.1]-G[1-15/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are inspecting MISUMI LPAJB8-P[9-15/0.01]-B[5-40/0.1]-G[1-15/1]-L[0-10/1], call FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are portrayed in the quality of spare parts and individual attention to each consumer. We understand everyone, who cooperated with us - hence, our regular consumers procure the most helpful purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4500 such clients, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Jamaica, Thailand, Dominica, Egypt, Norway, New Zealand, Brazil, Swaziland, Liberia, Eritrea, Georgia, Kiribati, Iraq, Uruguay, Turkmenistan, Kazakhstan, Kyrgyzstan, Laos, Estonia, Senegal, Cape Verde, North Korea, Haiti, Moldova, Eswatini, South Sudan, Jordan, Iceland, Mauritania, Bulgaria, Sudan, Ecuador, Antigua and Barbuda, Burundi, Bangladesh, Rwanda, Malaysia, Argentina, Israel, Mali, Bosnia and Herzegovina, Macedonia, Denmark, Paraguay, Brunei. A advanced logistics system and a partnership network assist us to dispatch our products anywhere in the earth immediately without undermining product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this amount is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as keep on top of it.
To inquire or make a request, contact us or send a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |