We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPAJA4-P[5-9/0.01]-B[3.5-25/0.1]-R[2-100/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are questing MISUMI LPAJA4-P[5-9/0.01]-B[3.5-25/0.1]-R[2-100/1]-L[0-10/1], call FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of spare parts and personalseparate attention to each orderer. We understand everyone, who conspired with us - hence, our regular purchasers receive the most helpful purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4500 such clients, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Panama, Uganda, Zimbabwe, Mozambique, Armenia, Equatorial Guinea, Rwanda, Dominica, Ecuador, Cyprus, Laos, Oman, Algeria, Jordan, Thailand, Ghana, Guinea, Argentina, Samoa, Uruguay, Finland, Norway, Gambia, Israel, Kiribati, Jamaica, Tonga, Mali, Seychelles, New Zealand, Nicaragua, Cameroon, Andorra, North Korea, Bosnia and Herzegovina, Kazakhstan, Switzerland, Hungary, Austria, Slovakia, Croatia, Mongolia, Macedonia, Senegal, Suriname. A well-built logistics bond and a partnership network let us to dispatch our products anywhere in the earth on-time without damaging product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of industrial equipment.
All items from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as stay in control.
To ask a question or book, get in touch with us or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |