We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPAJA16-P[18-24/0.01]-B[5-50/0.1]-R[9-500/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are inspecting MISUMI LPAJA16-P[18-24/0.01]-B[5-50/0.1]-R[9-500/1]-L[0-10/1], reach FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and individual attention to each client. We praise everyone, who liased with us - so, our regular consumers get the most attractive purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Tanzania, East Timor, Bosnia and Herzegovina, Libya, Luxembourg, Haiti, Mozambique, Bangladesh, El Salvador, Eswatini, Finland, Grenada, Zimbabwe, Georgia, Nepal, Indonesia, Singapore, Ireland, Mali, Dominica, Greece, Bolivia, Guyana, Poland, Cape Verde, Malta, Cyprus, Benin, Paraguay, Sweden, Azerbaijan, Croatia, Panama, Qatar, Ecuador, Madagascar, Ukraine, South Korea, Latvia, Belarus, Tonga, Albania, China, Swaziland, Central African Republic. A well-elaborated logistics connection and a partnership network let us to send our products anywhere in the planet on-time without disreputing product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this amount is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as stay in control.
To request or place an order, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |