We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPAGA4-P[5-9/0.01]-B[3.5-25/0.1]-R[2-500/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are looking for MISUMI LPAGA4-P[5-9/0.01]-B[3.5-25/0.1]-R[2-500/1]-L[0-10/1], reach FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and special attention to each buyer. We praise everyone, who engaged with us - so, our regular clients obtain the most attractive purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Zambia, Dominican Republic, New Zealand, Egypt, Bahamas, Bhutan, Nepal, Vietnam, Laos, South Korea, Burundi, The Bahamas, Togo, Honduras, Mauritius, El Salvador, Afghanistan, Czech Republic, Japan, Kyrgyzstan, Pakistan, Malaysia, Kuwait, Ireland, India, Serbia, Comoros, Uruguay, South Sudan, Denmark, Cape Verde, Peru, Luxembourg, Eswatini, East Timor, Mali, Swaziland, Syria, Brunei, Nigeria, Burkina Faso, United States, Zimbabwe, Croatia. A well-shaped logistics series and a partnership network let us to ship our products anywhere in the planet on-time without undermining product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this bulk is growing every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, phone us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |