We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPAGA3-P[4-8/0.01]-B[3.5-25/0.1]-R[2-500/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are inspecting MISUMI LPAGA3-P[4-8/0.01]-B[3.5-25/0.1]-R[2-500/1]-L[0-10/1], call FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are years of experience, which are portrayed in the quality of spare parts and individual attention to each orderer. We understand everyone, who conspired with us - hence, our regular consumers receive the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4500 such purchasers, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Finland, Congo, Suriname, Slovakia, Myanmar, Singapore, Australia, Norway, Albania, Rwanda, Angola, Uzbekistan, Macedonia, Burma, Equatorial Guinea, Burundi, Kazakhstan, Seychelles, Liberia, Mozambique, Mali, Tonga, Iran, Brazil, Cape Verde, Mongolia, Paraguay, Sweden, Ecuador, Panama, Armenia, Laos, Iceland, United Arab Emirates, Sudan, Botswana, Thailand, Bangladesh, Senegal, Luxembourg, Israel, Moldova, Sierra Leone, North Korea. A well-elaborated logistics bond and a partnership network allow us to send our goods anywhere in the earth promptly without disreputing product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the direction of industrial equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as stay in control.
To consult or book, contact us or send a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |