We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPACC20-P[21-30/0.01]-B[5-50/0.1]-R[1-15/1]-L[0-25/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are questing MISUMI LPACC20-P[21-30/0.01]-B[5-50/0.1]-R[1-15/1]-L[0-25/1], communicate with FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of items and particular attention to each buyer. We esteem everyone, who engaged with us - hence, our regular clients accept the most helpful purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4000 such clients, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Kazakhstan, South Sudan, Colombia, Morocco, Saudi Arabia, El Salvador, Slovenia, North Korea, Canada, Guinea, Guatemala, Austria, Syria, Nigeria, Switzerland, Belarus, Belize, Tajikistan, Equatorial Guinea, Sudan, Indonesia, Guyana, Pakistan, Fiji, Kuwait, Rwanda, Comoros, Haiti, China, Argentina, Poland, Mexico, Seychelles, Moldova, United Arab Emirates, Bulgaria, Jamaica, Tanzania, Georgia, Czech Republic, Dominica, Swaziland, Estonia, Samoa. A well-shaped logistics bond and a partnership network let us to conduct our items anywhere in the earth quickly without compromising product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |