We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPACC16-P[17-27/0.01]-B[5-50/0.1]-R[1-12/1]-L[0-25/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are seeking MISUMI LPACC16-P[17-27/0.01]-B[5-50/0.1]-R[1-12/1]-L[0-25/1], catch up with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of products and special attention to each orderer. We admire everyone, who conspired with us - so, our regular consumers obtain the most beneficial purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 3500 such clients, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Latvia, Ecuador, Lebanon, New Zealand, Netherlands, Burundi, Belgium, Malaysia, Guinea, Oman, Niger, Afghanistan, Bangladesh, Luxembourg, Kenya, Hungary, El Salvador, Bosnia and Herzegovina, Costa Rica, Mauritius, Bulgaria, Turkmenistan, Mali, Azerbaijan, Iran, Poland, Paraguay, Iraq, India, United States, Kyrgyzstan, Austria, Libya, Ireland, Tanzania, Brunei, Cameroon, Vietnam, Tunisia, Seychelles, Uganda, Thailand, Nigeria, Greece. A well-elaborated logistics system and a partnership network allow us to dispatch our units anywhere in the planet with no delay without damaging product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as stay in control.
To inquire or place an order, get in touch with us or write a message to the online chat on our site. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |