We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPACB16-P[17-27/0.01]-B[5-50/0.1]-G[1-24/1]-L[0-25/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are questing MISUMI LPACB16-P[17-27/0.01]-B[5-50/0.1]-G[1-24/1]-L[0-25/1], reach FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of outcomes and particular attention to each consumer. We value everyone, who cooperated with us - hence, our regular clients bring in the most acceptable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, Turkey, Georgia, Guinea-Bissau, Romania, East Timor, Turkmenistan, Dominican Republic, Philippines, Tanzania, Netherlands, Papua New Guinea, Chad, South Korea, Colombia, Senegal, Zimbabwe, Lithuania, Cape Verde, Seychelles, Cameroon, Saudi Arabia, Singapore, Bosnia and Herzegovina, Nepal, El Salvador, Guatemala, The Gambia, Dominica, Austria, Indonesia, Nicaragua, Peru, Chile, Afghanistan, Brunei, Madagascar, Hungary, Djibouti, Australia, Cyprus, Kiribati, Qatar, Ghana, Haiti, Sweden, Finland, Ireland. A well-shaped logistics bond and a partnership network cheer us to conduct our units anywhere in the earth with no delay without compromising product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that clients choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or book, phone us or write a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |