We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPACA8-P[9-15/0.01]-B[3.5-40/0.1]-R[4-500/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are inspecting MISUMI LPACA8-P[9-15/0.01]-B[3.5-40/0.1]-R[4-500/1]-L[0-10/1], catch up with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are represented in the quality of goods and individual attention to each user. We appreciate everyone, who worked with us - hence, our regular consumers bring in the most acceptable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4500 such purchasers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Kuwait, Cameroon, Lesotho, Saudi Arabia, Equatorial Guinea, Fiji, France, North Korea, Switzerland, Liberia, Belgium, Monaco, Kyrgyzstan, Burma, Swaziland, Bosnia and Herzegovina, Pakistan, Nigeria, Paraguay, Croatia, Japan, Malawi, New Zealand, Jordan, Slovakia, Tunisia, Bangladesh, Latvia, Senegal, Azerbaijan, Zambia, Burkina Faso, Ghana, Turkey, Bulgaria, South Korea, India, Suriname, Eswatini, Cape Verde, Denmark, Indonesia, Sierra Leone, Uganda, Greece, Niger. A well-elaborated logistics system and a partnership network let us to send our products anywhere in the earth on-time without disreputing product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as to stay on the top.
To get some advice or make a request, get in touch with us or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |