We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPACA4-P[5-9/0.01]-B[3.5-25/0.1]-R[2-500/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are seeking MISUMI LPACA4-P[5-9/0.01]-B[3.5-25/0.1]-R[2-500/1]-L[0-10/1], communicate with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are cycles of experience, which are symbolized in the quality of products and particular attention to each customer. We respect everyone, who joined with us - so, our regular buyers pick up the most beneficial purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Australia, Croatia, Dominican Republic, Japan, Haiti, Ecuador, Papua New Guinea, Qatar, Ukraine, The Bahamas, Honduras, Uzbekistan, Seychelles, Oman, Iran, Colombia, Namibia, Serbia, Afghanistan, Tonga, Gambia, Netherlands, Sweden, Georgia, Belarus, Philippines, Mauritius, Montenegro, Swaziland, Russia, Samoa, Rwanda, Indonesia, Kuwait, Yemen, Kyrgyzstan, Estonia, Central African Republic, Vietnam, Nigeria, United Arab Emirates, Senegal, Angola, East Timor, Botswana, Mauritania. A well-developed logistics chains and a partnership network let us to deliver our products anywhere in the planet on-time without discrediting product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, phone us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |