We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPABC20-P[22-30/0.01]-B[5-50/0.1]-R[1-15/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are seeking MISUMI LPABC20-P[22-30/0.01]-B[5-50/0.1]-R[1-15/1]-L[0-10/1], communicate with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are symbolized in the quality of products and particular attention to each client. We respect everyone, who liased with us - so, our regular buyers get the most beneficial purchase terms and discounts on the manufacturing equipment market. Today, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the planet Germany, United Kingdom, Sri Lanka, Sierra Leone, Djibouti, Romania, Cuba, The Gambia, Slovenia, Andorra, Cape Verde, Lithuania, Jamaica, Guyana, Cameroon, Kuwait, Fiji, Iraq, The Bahamas, Kyrgyzstan, Guatemala, Suriname, India, Tunisia, Japan, Angola, Eritrea, Uzbekistan, Switzerland, Madagascar, Togo, Liechtenstein, Uganda, Costa Rica, Azerbaijan, Cyprus, Burkina Faso, Senegal, Syria, Haiti, Mauritius, Turkey, United States, El Salvador, Peru, Moldova, Serbia, Sudan, United Arab Emirates, Malta, Poland, Latvia. A advanced logistics network and a partnership network cheer us to send our elements anywhere in the planet with no delay without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this quantity is rising every day. We are happy that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as keep on top of it.
To get some advice or place an order, contact us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |