We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GJPND10-[11-15/0.01]
Description
Large Head/Threaded/P Configurable
Stock availability:
On request
If you are looking for MISUMI GJPND10-[11-15/0.01], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and special attention to each consumer. We understand everyone, who liased with us - so, our regular buyers pick up the most beneficial purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such purchasers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Belarus, Eritrea, Portugal, Liechtenstein, Cuba, Colombia, Antigua and Barbuda, Canada, United States, Zimbabwe, Mauritius, Djibouti, Kyrgyzstan, Finland, Netherlands, Malawi, Cape Verde, Saudi Arabia, Sweden, Equatorial Guinea, Israel, Malaysia, Iraq, Nepal, Swaziland, Sierra Leone, Jamaica, India, Guatemala, Latvia, Suriname, Sudan, Syria, Brunei, Benin, Belize, Ireland, Peru, Costa Rica, Switzerland, Qatar, Comoros, Senegal. A well-elaborated logistics series and a partnership network help us to conduct our goods anywhere in the globe promptly without disreputing product quality.
A particular source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To get some advice or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
Type | Shape Code | Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPN | BB (Round) | JPN | A (Round) D (Diamond) | FPN | A (Round) D (Diamond) | FPNL | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPN | GFPN | GFPNL | |||||
EN 1.2510 Equiv. | - | - | - | - | BFPN | - | |||||
EN 1.4301 Equiv.* | - | - | SJPN | SJPN | SFPN | SFPNL | |||||
EN 1.4301 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Plating Hardness: 750HV ~ | - | HJPN | HFPN | - | |||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPN | CJPN | CFPN | CFPNL |
Part Number | - | P | - | L | - | B | - | ML | ||||
Type | Shape | D | ||||||||||
JPN | A | 3 | - | 5.20 | ||||||||
FPN | A | 5 | - | P6.00 | - | L5 | - | B4.0 | ||||
FPNL | A | 8 | - | P9.51 | - | L8 | - | B4.0 | - | ML8 |
Part Number | P Selection | L | B | ML | M (Coarse) | * Tightening Torque N • cm | m | (W) | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPN SJPN CJPN | BB (Round) | 3 | -0.002 -0.008 | 3.5 | 4 | 4.5 | 5 | 6 | 2 | 5 | 4.5 | 3 | 147 | 2 | 1.5 | |||||||
4 | -0.004 -0.012 | 4.5 | 5 | 6 | 7 | 6 | 6 | 4 | 333 | 3 | 1.8 | |||||||||||
5 | 6 | 7 | 8 | 3 | 7.5 | 5 | 676 | 2.2 | ||||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | 9 | 6 | 1156 | 3 | |||||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | 12 | 8 | 2803 | 4 | 3.5 | ||||||||||
10 | 11 | 12 | 13 | 10 | 15 | 10 | 5557 | 4 |
Part Number | P 0.01mm Increment | L | B | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPN GJPN SJPN HJPN CJPN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 5 | 4.5 | 3 | 147 | 2 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 6 | 6 | 4 | 333 | 3 | 1.8 | |||
5 | 5.50~8.00 | 3 | 7.5 | 5 | 676 | 2.2 | |||||
6 | 6.50~10.00 | 8 | 9 | 6 | 1156 | 3 | |||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | 12 | 8 | 2803 | 4 | 3.5 | |||
10 | 11.00~15.00 | 10 | 15 | 10 | 5557 | 4 | |||||
12 | -0.006 -0.017 | 13.00~18.00 | 8 | 18 | 12 | 9702 | 5 | ||||
16 | 17.00~25.00 | 24 | 16 | 24108 | 5 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPN GFPN BFPN SFPN HFPN CFPN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 4.5 | 3 | 147 | 2 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 6 | 4 | 333 | 3 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 1.0~10.0 | 7.5 | 5 | 676 | 2.2 | ||||
6 | 6.50~10.00 | 3~10 | 1.0~12.0 | 9 | 6 | 1156 | 3 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 1.0~15.0 | 12 | 8 | 2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 15 | 10 | 5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 18 | 12 | 9702 | 5 | |||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 24 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPNL GFPNL SFPNL CFPNL | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 3~9 | 3 | 147 | 2 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 4~12 | 4 | 333 | 3 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 1.0~10.0 | 5~15 | 5 | 676 | 2.2 | ||||
6 | 6.50~10.00 | 3~10 | 1.0~12.0 | 6~18 | 6 | 1156 | 3 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 1.0~15.0 | 8~24 | 8 | 2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 10~30 | 10 | 5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 12~30 | 12 | 9702 | 5 | |||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 16~40 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | 20 | 46942 | 9 |