We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BFPND16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]
Description
Large Head/Threaded/P Configurable
Stock availability:
On request
If you are looking for MISUMI BFPND16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1], reach FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of outputs and personalseparate attention to each consumer. We esteem everyone, who engaged with us - so, our regular buyers accept the most beneficial purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Uganda, Cape Verde, Canada, Dominican Republic, The Gambia, Colombia, Eswatini, Guyana, Peru, Brazil, United Arab Emirates, Jamaica, Ukraine, Algeria, The Bahamas, Cyprus, Central African Republic, Swaziland, Liberia, Mexico, Costa Rica, Greece, Samoa, Dominica, China, Laos, Afghanistan, Antigua and Barbuda, Argentina, Estonia, Finland, Chile, Zimbabwe, Malaysia, Luxembourg, Israel, Burkina Faso, Botswana, Panama, Brunei, Croatia, Togo, Qatar, Indonesia, Angola, Equatorial Guinea, Ireland, Kyrgyzstan. A advanced logistics series and a partnership network assist us to deliver our goods anywhere in the earth immediately without discrediting product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
Type | Shape Code | Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPN | BB (Round) | JPN | A (Round) D (Diamond) | FPN | A (Round) D (Diamond) | FPNL | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPN | GFPN | GFPNL | |||||
EN 1.2510 Equiv. | - | - | - | - | BFPN | - | |||||
EN 1.4301 Equiv.* | - | - | SJPN | SJPN | SFPN | SFPNL | |||||
EN 1.4301 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Plating Hardness: 750HV ~ | - | HJPN | HFPN | - | |||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPN | CJPN | CFPN | CFPNL |
Part Number | - | P | - | L | - | B | - | ML | ||||
Type | Shape | D | ||||||||||
JPN | A | 3 | - | 5.20 | ||||||||
FPN | A | 5 | - | P6.00 | - | L5 | - | B4.0 | ||||
FPNL | A | 8 | - | P9.51 | - | L8 | - | B4.0 | - | ML8 |
Part Number | P Selection | L | B | ML | M (Coarse) | * Tightening Torque N • cm | m | (W) | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPN SJPN CJPN | BB (Round) | 3 | -0.002 -0.008 | 3.5 | 4 | 4.5 | 5 | 6 | 2 | 5 | 4.5 | 3 | 147 | 2 | 1.5 | |||||||
4 | -0.004 -0.012 | 4.5 | 5 | 6 | 7 | 6 | 6 | 4 | 333 | 3 | 1.8 | |||||||||||
5 | 6 | 7 | 8 | 3 | 7.5 | 5 | 676 | 2.2 | ||||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | 9 | 6 | 1156 | 3 | |||||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | 12 | 8 | 2803 | 4 | 3.5 | ||||||||||
10 | 11 | 12 | 13 | 10 | 15 | 10 | 5557 | 4 |
Part Number | P 0.01mm Increment | L | B | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPN GJPN SJPN HJPN CJPN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 5 | 4.5 | 3 | 147 | 2 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 6 | 6 | 4 | 333 | 3 | 1.8 | |||
5 | 5.50~8.00 | 3 | 7.5 | 5 | 676 | 2.2 | |||||
6 | 6.50~10.00 | 8 | 9 | 6 | 1156 | 3 | |||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | 12 | 8 | 2803 | 4 | 3.5 | |||
10 | 11.00~15.00 | 10 | 15 | 10 | 5557 | 4 | |||||
12 | -0.006 -0.017 | 13.00~18.00 | 8 | 18 | 12 | 9702 | 5 | ||||
16 | 17.00~25.00 | 24 | 16 | 24108 | 5 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPN GFPN BFPN SFPN HFPN CFPN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 4.5 | 3 | 147 | 2 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 6 | 4 | 333 | 3 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 1.0~10.0 | 7.5 | 5 | 676 | 2.2 | ||||
6 | 6.50~10.00 | 3~10 | 1.0~12.0 | 9 | 6 | 1156 | 3 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 1.0~15.0 | 12 | 8 | 2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 15 | 10 | 5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 18 | 12 | 9702 | 5 | |||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 24 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPNL GFPNL SFPNL CFPNL | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 3~9 | 3 | 147 | 2 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 4~12 | 4 | 333 | 3 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 1.0~10.0 | 5~15 | 5 | 676 | 2.2 | ||||
6 | 6.50~10.00 | 3~10 | 1.0~12.0 | 6~18 | 6 | 1156 | 3 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 1.0~15.0 | 8~24 | 8 | 2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 10~30 | 10 | 5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 12~30 | 12 | 9702 | 5 | |||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 16~40 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | 20 | 46942 | 9 |