We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPUD8T-P[5-9/0.01]-L[12-16/1]-B[2-12/0.1]
Description
Shoulder/Tapped/P Standard
Stock availability:
On request
If you are pursuing MISUMI FPUD8T-P[5-9/0.01]-L[12-16/1]-B[2-12/0.1], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each client. We appreciate everyone, who conspired with us - so, our regular customers get the most flexible purchase forms and discounts on the industrial equipment market. At present, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Haiti, Botswana, Latvia, Samoa, New Zealand, South Korea, Portugal, Singapore, Suriname, Grenada, Indonesia, Bangladesh, Luxembourg, Burkina Faso, Nepal, The Gambia, Albania, Chad, Serbia, Uzbekistan, Costa Rica, Netherlands, Ghana, Djibouti, Russia, Zimbabwe, Nicaragua, Croatia, Chile, Swaziland, Tajikistan, Philippines, Tunisia, Morocco, Zambia, Yemen, East Timor, Kuwait, Lithuania, Afghanistan, Mozambique, United Arab Emirates, Estonia. A well-developed logistics series and a partnership network help us to dispatch our elements anywhere in the globe with no delay without discrediting product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is rising every day. We are proud that clients choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or book, phone us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape | Type | Shape | Type | Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | UB (Round) DU (Diamond) | JP | UA (Round) UD (Diamond) | FP | UA (Round) UD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFP | ||||
EN 1.4301 Equiv. | - | - | SJP | - | SFP |
Part Number | - | P | - | L | - | B |
JPUB8 | - | 6 | ||||
JPUA6 | - | 4.02 | ||||
FPUA6 | - | P4.01 | - | L8 | - | B3.5 |
D | Tolerance g6 | m | H | (W) | L | M (Coarse) | Tightening Torque N cm |
5 | -0.004 -0.012 | 2 | 8 | 1.5 | 3 | M2 | - |
6 | 1.8 | 5 | M3 | 147 | |||
6T | 4 | M2.6 | - | ||||
8 | -0.005 -0.014 | 3 | 11 | 2.2 | 8 | M5 | 676 |
8T | 6 | M4 | 333 | ||||
10 | 13 | 3 | 8 | M5 | 676 | ||
10T | 6 | M4 | 333 | ||||
12 | -0.006 -0.017 | 15 | 3.2 | 8 | M5 | 676 | |
12T | 6 | M4 | 333 | ||||
13 | 4 | 16 | 3.5 | 10 | M8 | 2803 | |
13T | 9 | M6 | 1156 | ||||
16 | 19 | 4 | 12 | M8 | 2803 | ||
16T | 9 | M6 | 1156 | ||||
20 | -0.007 -0.020 | 5 | 23 | 5.5 | 12 | M8 | 2803 |
20T | 9 | M6 | 1156 |
Part Number | P Selection | L | B | Unit Price Round Shape | Unit Price Diamond Shape | ||||
Type | Shape | D | EN 1.2510 Equiv. Hardened JPUB | EN 1.4301 Equiv. SJPUB | EN 1.2510 Equiv. Hardened JPDU | EN 1.4301 Equiv. SJPDU | |||
JP SJP | UB (Round) DU (Diamond) | 5 | 3 4 5 6 | 10 | 5 | - | |||
6 | 4 5 6 | ||||||||
6T | |||||||||
8 | 5 6 8 | 15 | 6 | ||||||
8T | |||||||||
10 | 8 10 | 8 | |||||||
12 | 8 10 12 | ||||||||
13 | 8 10 12 13 | 22 | |||||||
16 | 13 14 15 16 | 10 | |||||||
20 | 16 20 | 30 |
Part Number | P 0.01mm Increment | L | B | Unit Price Round Shape | Unit Price Diamond Shape | ||
Type | Shape | D | EN 1.2510 Equiv. Hardened JPUA | EN 1.2510 Equiv. Hardened JPUD | |||
JP | UA (Round) UD (Diamond) | 5 | 3.00~6.00 | 10 | 5 | ||
6 | 4.00~7.00 | ||||||
6T | |||||||
8 | 5.00~9.00 | 15 | 6 | ||||
8T | |||||||
10 | 7.00~11.00 | 8 | |||||
12 | 7.00~12.00 | ||||||
13 | 8.00~13.00 | 22 | |||||
16 | 13.00~16.00 | 10 | |||||
20 | 16.00~20.00 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | Unit Price Round Shape | Unit Price Diamond Shape | ||||||
Type | Shape | D | EN 1.2510 Equiv. Hardened FPUA | Hard EN 1.2510 Equiv. GFPUA | EN 1.4301 Equiv. SFPUA | EN 1.2510 Equiv. Hardened FPUD | Hard EN 1.2510 Equiv. GFPUD | EN 1.4301 Equiv. SFPUD | |||
FP GFP SFP | UA (Round) UD (Diamond) | 5 | 3.00~6.00 | 5~10 | 2.0~10.0 | ||||||
6 | 4.00~7.00 | 6(9)~12 | |||||||||
6T | |||||||||||
8 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | ||||||||
8T | |||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | ||||||||
10T | 8(12)~16 | ||||||||||
12 | 7.00~12.00 | 12~24 | 3.0~20.0 | ||||||||
12T | 8(12)~18 | ||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | ||||||||
13T | 10(14)~20 | ||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | ||||||||
16T | 10(14)~24 | ||||||||||
20 | 16.00~20.00 | 20~40 | 5.0~20.0 | ||||||||
20T | 12(18)~30 |