We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPUD16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]
Description
Shoulder/Tapped/P Standard
Stock availability:
On request
If you are looking for MISUMI FPUD16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each user. We value everyone, who collaborated with us - so, our regular buyers pick up the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Spain, Guatemala, Yemen, United States, Bangladesh, Comoros, Palestine, Japan, East Timor, Liberia, Kuwait, Iraq, Finland, Seychelles, Dominica, Croatia, Botswana, Turkmenistan, Samoa, Romania, Turkey, Luxembourg, Georgia, Guyana, Uzbekistan, El Salvador, Panama, Kyrgyzstan, Suriname, Ecuador, Cyprus, Tonga, Syria, Namibia, Morocco, Zimbabwe, Sweden, Argentina, Brunei, Afghanistan, Togo, Albania. A well-elaborated logistics chains and a partnership network assist us to conduct our units anywhere in the earth with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To request or book, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape | Type | Shape | Type | Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | UB (Round) DU (Diamond) | JP | UA (Round) UD (Diamond) | FP | UA (Round) UD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFP | ||||
EN 1.4301 Equiv. | - | - | SJP | - | SFP |
Part Number | - | P | - | L | - | B |
JPUB8 | - | 6 | ||||
JPUA6 | - | 4.02 | ||||
FPUA6 | - | P4.01 | - | L8 | - | B3.5 |
D | Tolerance g6 | m | H | (W) | L | M (Coarse) | Tightening Torque N cm |
5 | -0.004 -0.012 | 2 | 8 | 1.5 | 3 | M2 | - |
6 | 1.8 | 5 | M3 | 147 | |||
6T | 4 | M2.6 | - | ||||
8 | -0.005 -0.014 | 3 | 11 | 2.2 | 8 | M5 | 676 |
8T | 6 | M4 | 333 | ||||
10 | 13 | 3 | 8 | M5 | 676 | ||
10T | 6 | M4 | 333 | ||||
12 | -0.006 -0.017 | 15 | 3.2 | 8 | M5 | 676 | |
12T | 6 | M4 | 333 | ||||
13 | 4 | 16 | 3.5 | 10 | M8 | 2803 | |
13T | 9 | M6 | 1156 | ||||
16 | 19 | 4 | 12 | M8 | 2803 | ||
16T | 9 | M6 | 1156 | ||||
20 | -0.007 -0.020 | 5 | 23 | 5.5 | 12 | M8 | 2803 |
20T | 9 | M6 | 1156 |
Part Number | P Selection | L | B | Unit Price Round Shape | Unit Price Diamond Shape | ||||
Type | Shape | D | EN 1.2510 Equiv. Hardened JPUB | EN 1.4301 Equiv. SJPUB | EN 1.2510 Equiv. Hardened JPDU | EN 1.4301 Equiv. SJPDU | |||
JP SJP | UB (Round) DU (Diamond) | 5 | 3 4 5 6 | 10 | 5 | - | |||
6 | 4 5 6 | ||||||||
6T | |||||||||
8 | 5 6 8 | 15 | 6 | ||||||
8T | |||||||||
10 | 8 10 | 8 | |||||||
12 | 8 10 12 | ||||||||
13 | 8 10 12 13 | 22 | |||||||
16 | 13 14 15 16 | 10 | |||||||
20 | 16 20 | 30 |
Part Number | P 0.01mm Increment | L | B | Unit Price Round Shape | Unit Price Diamond Shape | ||
Type | Shape | D | EN 1.2510 Equiv. Hardened JPUA | EN 1.2510 Equiv. Hardened JPUD | |||
JP | UA (Round) UD (Diamond) | 5 | 3.00~6.00 | 10 | 5 | ||
6 | 4.00~7.00 | ||||||
6T | |||||||
8 | 5.00~9.00 | 15 | 6 | ||||
8T | |||||||
10 | 7.00~11.00 | 8 | |||||
12 | 7.00~12.00 | ||||||
13 | 8.00~13.00 | 22 | |||||
16 | 13.00~16.00 | 10 | |||||
20 | 16.00~20.00 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | Unit Price Round Shape | Unit Price Diamond Shape | ||||||
Type | Shape | D | EN 1.2510 Equiv. Hardened FPUA | Hard EN 1.2510 Equiv. GFPUA | EN 1.4301 Equiv. SFPUA | EN 1.2510 Equiv. Hardened FPUD | Hard EN 1.2510 Equiv. GFPUD | EN 1.4301 Equiv. SFPUD | |||
FP GFP SFP | UA (Round) UD (Diamond) | 5 | 3.00~6.00 | 5~10 | 2.0~10.0 | ||||||
6 | 4.00~7.00 | 6(9)~12 | |||||||||
6T | |||||||||||
8 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | ||||||||
8T | |||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | ||||||||
10T | 8(12)~16 | ||||||||||
12 | 7.00~12.00 | 12~24 | 3.0~20.0 | ||||||||
12T | 8(12)~18 | ||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | ||||||||
13T | 10(14)~20 | ||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | ||||||||
16T | 10(14)~24 | ||||||||||
20 | 16.00~20.00 | 20~40 | 5.0~20.0 | ||||||||
20T | 12(18)~30 |