We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GFPQTA6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are questing MISUMI GFPQTA6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each client. We appreciate everyone, who conspired with us - so, our regular purchasers get the most flexible purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Lebanon, Czech Republic, Lithuania, Senegal, East Timor, Poland, Sudan, Afghanistan, North Korea, Zambia, Seychelles, Angola, Finland, Gambia, Iraq, Togo, Romania, Sweden, Comoros, Switzerland, Liechtenstein, Haiti, Algeria, Guyana, Malta, Belarus, Nicaragua, Kenya, Bolivia, Malaysia, Benin, Suriname, Bosnia and Herzegovina, Syria, Guatemala, Kuwait, Bulgaria, Estonia, Namibia. A well-shaped logistics chains and a partnership network assist us to ship our units anywhere in the earth with no delay without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, phone us or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | |||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | 6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | 8 | M3 | 147 | 5 | ||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | 676 | 8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | M2 | - | 3 | 2.2 |
6 | 6.50~10.00 | 8 | M3 | 147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 15 | M5 | 676 | 8 | 3.5 | |||
8T | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | 676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~10.0 | M2 | - | 3 | 2.2 |
6 | 6.50~10.00 | 6(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 3 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 3.5 | ||
8T | 6(12)~16 | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 4 | |||
10T | 6(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 5 | ||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | 8(14)~20 | M6 | 1156 | 9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | 9 |